S-1112B42PI-L7BTFU
Product Overview
Category
S-1112B42PI-L7BTFU belongs to the category of voltage regulators.
Use
This product is primarily used for voltage regulation in electronic circuits.
Characteristics
- High precision voltage regulation
- Low dropout voltage
- Wide input voltage range
- Low quiescent current
- Thermal shutdown protection
Package
The S-1112B42PI-L7BTFU comes in a small surface-mount package, making it suitable for compact electronic devices.
Essence
The essence of this product lies in its ability to provide stable and regulated voltage output, ensuring proper functioning of electronic circuits.
Packaging/Quantity
The S-1112B42PI-L7BTFU is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 4.2V
- Output Current: 100mA
- Dropout Voltage: 150mV (typical)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-1112B42PI-L7BTFU has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- CE: Chip enable pin
Functional Features
- High precision voltage regulation ensures stable output voltage.
- Low dropout voltage allows efficient operation even with low input voltages.
- Wide input voltage range provides flexibility in various applications.
- Low quiescent current minimizes power consumption.
- Thermal shutdown protection prevents damage due to excessive heat.
Advantages and Disadvantages
Advantages
- High precision voltage regulation ensures reliable performance.
- Low dropout voltage allows for efficient power utilization.
- Wide input voltage range provides versatility in different applications.
- Low quiescent current helps conserve power.
- Thermal shutdown protection enhances product durability.
Disadvantages
- Limited output current may not be suitable for high-power applications.
- Requires external components for proper operation.
Working Principles
The S-1112B42PI-L7BTFU operates based on a voltage regulation principle. It takes an input voltage within the specified range and regulates it to a stable 4.2V output. This is achieved through internal circuitry that adjusts the voltage based on feedback mechanisms.
Detailed Application Field Plans
The S-1112B42PI-L7BTFU finds application in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Medical equipment - Industrial control systems
Detailed and Complete Alternative Models
- S-1112B42PI-M5T1G: Similar specifications, different package type (SOT-23-5)
- S-1112B42PI-L6JTFU: Similar specifications, lower dropout voltage (100mV)
- S-1112B42PI-L8JTFU: Similar specifications, higher output current (200mA)
These alternative models provide options with slight variations in package type, dropout voltage, and output current to cater to specific application requirements.
In conclusion, the S-1112B42PI-L7BTFU is a voltage regulator that offers high precision voltage regulation, low dropout voltage, and wide input voltage range. Its compact package, functional features, and thermal shutdown protection make it suitable for a variety of electronic devices. While it has limitations in terms of output current and external component requirements, there are alternative models available to address specific needs.
기술 솔루션에 S-1112B42PI-L7BTFU 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of S-1112B42PI-L7BTFU in technical solutions:
Q: What is S-1112B42PI-L7BTFU? A: S-1112B42PI-L7BTFU is a specific model of voltage regulator IC (integrated circuit) used for power management in electronic devices.
Q: What is the input voltage range of S-1112B42PI-L7BTFU? A: The input voltage range of S-1112B42PI-L7BTFU is typically between 2.5V and 6.0V.
Q: What is the output voltage of S-1112B42PI-L7BTFU? A: The output voltage of S-1112B42PI-L7BTFU is fixed at 4.2V.
Q: What is the maximum output current of S-1112B42PI-L7BTFU? A: The maximum output current of S-1112B42PI-L7BTFU is 150mA.
Q: Can S-1112B42PI-L7BTFU handle input voltage fluctuations? A: Yes, S-1112B42PI-L7BTFU has built-in voltage regulation and can handle input voltage fluctuations within its specified range.
Q: Is S-1112B42PI-L7BTFU suitable for battery-powered applications? A: Yes, S-1112B42PI-L7BTFU is commonly used in battery-powered applications due to its low quiescent current and efficient power conversion.
Q: Does S-1112B42PI-L7BTFU have over-temperature protection? A: Yes, S-1112B42PI-L7BTFU incorporates over-temperature protection to prevent damage during high-temperature conditions.
Q: Can S-1112B42PI-L7BTFU be used in automotive applications? A: Yes, S-1112B42PI-L7BTFU is designed to meet automotive standards and can be used in automotive applications.
Q: What is the package type of S-1112B42PI-L7BTFU? A: S-1112B42PI-L7BTFU comes in a small surface-mount package known as SOT-23-5.
Q: Are there any application notes or reference designs available for S-1112B42PI-L7BTFU? A: Yes, the manufacturer provides application notes and reference designs that can help with the implementation of S-1112B42PI-L7BTFU in various technical solutions.
Please note that the answers provided here are general and may vary depending on the specific datasheet and documentation provided by the manufacturer of S-1112B42PI-L7BTFU.