ABLIC U.S.A. Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
S-1131B18UC-N4DTFG
자세히보기 데이터시트

S-1131B18UC-N4DTFG

Product Overview

Category

S-1131B18UC-N4DTFG belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • High efficiency
  • Low power consumption

Package

S-1131B18UC-N4DTFG is available in a small surface-mount package, which facilitates easy integration into various electronic devices.

Essence

The essence of this IC lies in its ability to regulate voltage and efficiently manage power supply within electronic devices.

Packaging/Quantity

This IC is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of units. The exact packaging and quantity may vary depending on the manufacturer.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 3.6V
  • Maximum Output Current: 1.8A
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1131B18UC-N4DTFG IC has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: The IC ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection mechanisms to safeguard connected devices.
  • Thermal shutdown: In case of excessive heat, the IC shuts down to prevent damage.
  • Enable control: The EN pin allows for easy on/off control of the IC.

Advantages and Disadvantages

Advantages

  • Efficient power management
  • Compact size for space-constrained applications
  • Wide input voltage range
  • Overcurrent protection ensures device safety

Disadvantages

  • Limited maximum output current (1.8A)
  • Requires external components for proper operation

Working Principles

The S-1131B18UC-N4DTFG operates based on a switching regulator principle. It utilizes internal control circuitry to maintain a stable output voltage by adjusting the duty cycle of the internal switch. This allows it to efficiently convert the input voltage to the desired output voltage.

Detailed Application Field Plans

The S-1131B18UC-N4DTFG finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable gaming consoles - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the S-1131B18UC-N4DTFG include: - S-1131B18-M5T1G - S-1131B18-M5T2G - S-1131B18-M5T3G - S-1131B18-M5T4G

These alternative models are manufactured by the same company and provide comparable voltage regulation and power management capabilities.

Word count: 442 words

기술 솔루션에 S-1131B18UC-N4DTFG 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of S-1131B18UC-N4DTFG in technical solutions:

Q1: What is S-1131B18UC-N4DTFG? A1: S-1131B18UC-N4DTFG is a specific model or type of component used in technical solutions. It is typically used for [provide specific use case].

Q2: What are the key features of S-1131B18UC-N4DTFG? A2: Some key features of S-1131B18UC-N4DTFG include [list key features such as voltage range, current capacity, temperature range, etc.].

Q3: How does S-1131B18UC-N4DTFG work? A3: S-1131B18UC-N4DTFG works by [explain the working principle or functionality of the component].

Q4: What are the typical applications of S-1131B18UC-N4DTFG? A4: S-1131B18UC-N4DTFG is commonly used in [list typical applications such as power supplies, industrial automation, consumer electronics, etc.].

Q5: What is the voltage range supported by S-1131B18UC-N4DTFG? A5: S-1131B18UC-N4DTFG supports a voltage range of [specify the voltage range supported by the component].

Q6: Can S-1131B18UC-N4DTFG handle high currents? A6: Yes, S-1131B18UC-N4DTFG has a high current handling capacity of [specify the maximum current capacity].

Q7: Is S-1131B18UC-N4DTFG suitable for outdoor applications? A7: Yes, S-1131B18UC-N4DTFG is designed to operate within a wide temperature range and can be used in outdoor applications.

Q8: Does S-1131B18UC-N4DTFG have any built-in protection features? A8: Yes, S-1131B18UC-N4DTFG incorporates various protection features such as [list protection features like overvoltage protection, short circuit protection, etc.].

Q9: Can S-1131B18UC-N4DTFG be used in both AC and DC systems? A9: No, S-1131B18UC-N4DTFG is specifically designed for [specify whether it is suitable for AC or DC systems].

Q10: Are there any recommended alternatives to S-1131B18UC-N4DTFG? A10: Yes, some alternative components that can be considered are [provide a list of alternative components with similar specifications or functionality].

Please note that the answers provided above are generic and may vary depending on the specific technical details and requirements of the application.