S-1135A2J-A6T1U

Product Overview

Category

S-1135A2J-A6T1U belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

• Compact size
• High efficiency
• Low power consumption
• Wide input voltage range
• Adjustable output voltage
• Overcurrent protection
• Thermal shutdown protection

Package

The S-1135A2J-A6T1U comes in a small surface-mount package, making it suitable for space-constrained applications.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage to electronic devices, ensuring their proper functioning.

Packaging/Quantity

The S-1135A2J-A6T1U is typically packaged in reels containing a specified quantity of units, which varies depending on the manufacturer's specifications.

Specifications

• Input Voltage Range: 2.0V - 6.0V
• Output Voltage Range: 0.8V - 5.0V
• Maximum Output Current: 100mA
• Dropout Voltage: 200mV (at 50mA)
• Quiescent Current: 30µA (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1135A2J-A6T1U has the following pin configuration:

1. VIN: Input voltage pin
2. GND: Ground pin
3. VOUT: Output voltage pin
4. CE: Chip enable pin (active high)

Functional Features

• Voltage Regulation: The S-1135A2J-A6T1U maintains a constant output voltage regardless of changes in the input voltage or load conditions.
• Overcurrent Protection: In the event of excessive current flow, the device automatically shuts down to protect itself and the connected circuitry.
• Thermal Shutdown Protection: If the temperature exceeds a certain threshold, the regulator enters a shutdown mode to prevent damage due to overheating.

Advantages and Disadvantages

Advantages

• Small form factor enables usage in space-constrained applications.
• High efficiency results in minimal power loss.
• Wide input voltage range allows compatibility with various power sources.
• Adjustable output voltage provides flexibility for different requirements.
• Overcurrent and thermal protection enhance reliability and safety.

Disadvantages

• Limited maximum output current may not be suitable for high-power applications.
• Dropout voltage may affect performance in low-input voltage scenarios.

Working Principles

The S-1135A2J-A6T1U operates based on a feedback control mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. This is achieved through the use of a voltage reference, error amplifier, and pass transistor.

Detailed Application Field Plans

The S-1135A2J-A6T1U finds application in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable devices - Medical equipment - Industrial automation systems

Detailed and Complete Alternative Models

1. S-1135B2J-A6T1U
2. S-1135C2J-A6T1U
3. S-1135D2J-A6T1U
4. S-1135E2J-A6T1U
5. S-1135F2J-A6T1U

These alternative models offer similar functionality and characteristics, providing options for different design requirements.

Word count: 431 words