S-1135C16-M5T1U

Product Overview

Use

It is used to regulate voltage in electronic circuits and devices.

Characteristics

Input Voltage: 2.0V to 6.0V
Output Voltage: 1.6V
Maximum Output Current: 150mA
Low Dropout Voltage: 160mV (at 100mA)
Low Standby Current: 0.1μA (typ.)
Package: SOT-23-5
Operating Temperature Range: -40°C to +85°C

Packaging/Quantity

The S-1135C16-M5T1U is typically available in tape and reel packaging with a quantity of 3000 units per reel.

Specifications

Input Voltage Range: 2.0V to 6.0V
Output Voltage: 1.6V ±2%
Output Current: 150mA (max)
Dropout Voltage: 160mV (at 100mA)
Standby Current: 0.1μA (typ.)
Ripple Rejection: 70dB (typ.)

Detailed Pin Configuration

The S-1135C16-M5T1U has the following pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. CE (Control Enable) 4. VOUT (Output Voltage) 5. NC (No Connection)

Functional Features

Low dropout voltage
Low standby current
High ripple rejection
Overcurrent protection
Thermal shutdown protection

Advantages and Disadvantages

Advantages

Wide input voltage range
Low dropout voltage
Low standby current
Overcurrent and thermal protection

Disadvantages

Limited maximum output current (150mA)

Working Principles

The S-1135C16-M5T1U operates by regulating the input voltage to provide a stable output voltage, even when the input voltage fluctuates within the specified range. It achieves this through internal circuitry that adjusts the output voltage based on the control enable signal and maintains stability under varying load conditions.

Detailed Application Field Plans

The S-1135C16-M5T1U is commonly used in portable electronic devices, battery-powered systems, and low-power applications where a stable and regulated voltage supply is required. It is suitable for use in handheld consumer electronics, IoT devices, and wearable technology.

Detailed and Complete Alternative Models

Some alternative models to the S-1135C16-M5T1U include: - S-1135C18-M5T1U - S-1135C15-M5T1U - S-1135C20-M5T1U

These models offer similar voltage regulation capabilities with variations in output voltage and current specifications.

This entry provides comprehensive information about the S-1135C16-M5T1U voltage regulator, covering its basic information overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

기술 솔루션에 S-1135C16-M5T1U 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

What is S-1135C16-M5T1U?
- S-1135C16-M5T1U is a voltage regulator IC designed for use in various technical solutions to provide stable and reliable power supply.
What are the key features of S-1135C16-M5T1U?
- The key features of S-1135C16-M5T1U include a wide input voltage range, low dropout voltage, high output voltage accuracy, and overcurrent protection.
In what technical solutions can S-1135C16-M5T1U be used?
- S-1135C16-M5T1U can be used in applications such as battery-powered devices, portable electronics, industrial equipment, and automotive systems.
What is the typical output current of S-1135C16-M5T1U?
- The typical output current of S-1135C16-M5T1U is 1.0A, making it suitable for powering a wide range of electronic components.
How does S-1135C16-M5T1U help in improving system reliability?
- S-1135C16-M5T1U helps improve system reliability by providing stable and regulated power supply, which is crucial for the proper functioning of electronic devices.
What are the thermal considerations when using S-1135C16-M5T1U?
- Thermal considerations for S-1135C16-M5T1U include proper heat sinking and thermal management to ensure optimal performance and prevent overheating.
Does S-1135C16-M5T1U have built-in protection features?
- Yes, S-1135C16-M5T1U has built-in overcurrent protection and thermal shutdown features to safeguard the device and the connected circuitry.
Can S-1135C16-M5T1U be used in automotive applications?
- Yes, S-1135C16-M5T1U is suitable for automotive applications where stable and reliable power supply is essential for various electronic systems.
What are the recommended input and output capacitors for S-1135C16-M5T1U?
- The recommended input and output capacitors for S-1135C16-M5T1U are specified in the datasheet and should be selected based on the application requirements.
Where can I find detailed technical specifications and application notes for S-1135C16-M5T1U?
- Detailed technical specifications and application notes for S-1135C16-M5T1U can be found in the product datasheet provided by the manufacturer.