ABLIC U.S.A. Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
S-1137D30-I6T2U
자세히보기 데이터시트

S-1137D30-I6T2U

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: Low Dropout Voltage Regulator
  • Package: SOT-23-5
  • Essence: Voltage Regulator IC
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 3.0V ±2%
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV @ 100mA
  • Quiescent Current: 40μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input Voltage
  2. GND: Ground
  3. NC: No Connection
  4. VOUT: Output Voltage
  5. EN: Enable Pin

Functional Features

  • Low dropout voltage for efficient power management.
  • Stable output voltage with low ripple and noise.
  • Built-in overcurrent protection.
  • Thermal shutdown protection.
  • Enable pin for easy on/off control.

Advantages

  • Wide input voltage range allows flexibility in various applications.
  • Low quiescent current minimizes power consumption.
  • Small package size enables space-saving designs.
  • Excellent line and load regulation for stable performance.
  • Robust protection features enhance reliability.

Disadvantages

  • Limited maximum output current may restrict usage in high-power applications.
  • Dropout voltage may cause slight power loss in low input voltage scenarios.

Working Principles

The S-1137D30-I6T2U is a low dropout voltage regulator IC designed to provide a stable output voltage of 3.0V. It operates by regulating the input voltage within a specified range and maintaining a constant output voltage even when the input voltage fluctuates. The IC achieves this through a combination of internal circuitry and feedback mechanisms.

Detailed Application Field Plans

The S-1137D30-I6T2U is commonly used in various electronic devices that require a stable 3.0V power supply. Some typical application fields include: - Battery-powered devices - Portable consumer electronics - IoT devices - Medical equipment - Industrial automation

Detailed and Complete Alternative Models

  1. S-1137D30-M6T2U: Similar specifications, different package (SOT-89-5)
  2. S-1137D30-I6T1U: Similar specifications, lower maximum output current (100mA)
  3. S-1137D30-I6T3U: Similar specifications, higher maximum output current (200mA)

Note: This is not an exhaustive list, and there may be other alternative models available from different manufacturers.

Word count: 314 words

기술 솔루션에 S-1137D30-I6T2U 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of S-1137D30-I6T2U in technical solutions:

  1. Q: What is S-1137D30-I6T2U? A: S-1137D30-I6T2U is a specific model or part number of a component used in technical solutions, typically in electronic circuits.

  2. Q: What is the purpose of S-1137D30-I6T2U? A: The purpose of S-1137D30-I6T2U is to regulate voltage levels within a circuit, ensuring stable and reliable power supply to other components.

  3. Q: What are the key features of S-1137D30-I6T2U? A: Some key features of S-1137D30-I6T2U include low dropout voltage, high output current capability, thermal shutdown protection, and overcurrent protection.

  4. Q: How does S-1137D30-I6T2U help in technical solutions? A: S-1137D30-I6T2U helps in technical solutions by providing a regulated power supply, preventing voltage fluctuations that could damage or affect the performance of other components.

  5. Q: What is the input voltage range for S-1137D30-I6T2U? A: The input voltage range for S-1137D30-I6T2U typically varies between 2.0V and 6.0V.

  6. Q: What is the output voltage of S-1137D30-I6T2U? A: The output voltage of S-1137D30-I6T2U is fixed at 3.0V.

  7. Q: Can S-1137D30-I6T2U handle high current loads? A: Yes, S-1137D30-I6T2U has a high output current capability, typically up to 1.0A.

  8. Q: Does S-1137D30-I6T2U have any built-in protection features? A: Yes, S-1137D30-I6T2U has built-in thermal shutdown and overcurrent protection to safeguard against excessive heat or current.

  9. Q: Is S-1137D30-I6T2U suitable for battery-powered applications? A: Yes, S-1137D30-I6T2U is often used in battery-powered applications due to its low dropout voltage, which allows efficient power utilization.

  10. Q: Are there any recommended external components to use with S-1137D30-I6T2U? A: It is recommended to use input/output capacitors and resistors as per the manufacturer's datasheet to ensure stability and optimize performance.

Please note that the specific details and answers may vary depending on the manufacturer's specifications and application requirements.