S-1142B25I-E6T1U
Product Overview
Category
S-1142B25I-E6T1U belongs to the category of voltage regulators.
Use
This product is primarily used for regulating voltage in electronic circuits.
Characteristics
- Compact size
- High efficiency
- Low power consumption
- Wide input voltage range
- Overcurrent protection
- Thermal shutdown protection
Package
The S-1142B25I-E6T1U comes in a small surface-mount package.
Essence
The essence of this product lies in its ability to provide stable and regulated voltage output, ensuring the proper functioning of electronic devices.
Packaging/Quantity
The S-1142B25I-E6T1U is typically packaged in reels and is available in quantities of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.5V
- Output Voltage: 2.5V
- Output Current: 100mA
- Dropout Voltage: 200mV (max)
- Quiescent Current: 30µA (typ)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-1142B25I-E6T1U has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
Functional Features
- Voltage regulation: The S-1142B25I-E6T1U ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices from excessive current flow.
- Thermal shutdown protection: In case of excessive temperature, the regulator shuts down to prevent damage.
Advantages and Disadvantages
Advantages
- Small form factor allows for easy integration into compact electronic devices.
- High efficiency results in minimal power loss during voltage regulation.
- Wide input voltage range makes it compatible with various power sources.
Disadvantages
- Limited output current capacity may not be suitable for high-power applications.
- Dropout voltage of 200mV may affect the performance of low-voltage devices.
Working Principles
The S-1142B25I-E6T1U operates based on a feedback control mechanism. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for any variations in the input voltage.
Detailed Application Field Plans
The S-1142B25I-E6T1U finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices
Detailed and Complete Alternative Models
- S-1142B33I-E6T1U: Similar to S-1142B25I-E6T1U, but with an output voltage of 3.3V.
- S-1142B12I-E6T1U: Similar to S-1142B25I-E6T1U, but with an output voltage of 1.2V.
- S-1142B50I-E6T1U: Similar to S-1142B25I-E6T1U, but with an output voltage of 5.0V.
These alternative models provide different output voltage options to cater to specific application requirements.
In conclusion, the S-1142B25I-E6T1U is a compact and efficient voltage regulator that ensures stable voltage output in electronic circuits. Its wide input voltage range, overcurrent protection, and thermal shutdown features make it suitable for various applications. However, its limited output current capacity and dropout voltage should be considered when selecting the appropriate model for specific use cases.
기술 솔루션에 S-1142B25I-E6T1U 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of S-1142B25I-E6T1U in technical solutions:
Q1: What is S-1142B25I-E6T1U? A1: S-1142B25I-E6T1U is a specific model of voltage detector IC (integrated circuit) used for monitoring and detecting voltage levels in electronic circuits.
Q2: What is the operating voltage range of S-1142B25I-E6T1U? A2: The operating voltage range of S-1142B25I-E6T1U is typically between 0.8V and 6.0V.
Q3: How does S-1142B25I-E6T1U detect voltage levels? A3: S-1142B25I-E6T1U uses a built-in voltage reference and comparator to monitor the input voltage and provide a digital output signal when the voltage exceeds or falls below a certain threshold.
Q4: What is the output format of S-1142B25I-E6T1U? A4: S-1142B25I-E6T1U provides a digital output signal, either high or low, depending on the detected voltage level.
Q5: Can S-1142B25I-E6T1U be used in battery-powered applications? A5: Yes, S-1142B25I-E6T1U can be used in battery-powered applications as it operates within a wide voltage range and has low power consumption.
Q6: Is S-1142B25I-E6T1U suitable for automotive applications? A6: Yes, S-1142B25I-E6T1U is suitable for automotive applications as it meets the required specifications and has a wide operating temperature range.
Q7: Can S-1142B25I-E6T1U be used for overvoltage protection? A7: Yes, S-1142B25I-E6T1U can be used for overvoltage protection by setting the threshold voltage to the desired level and triggering an action when the voltage exceeds that threshold.
Q8: What is the response time of S-1142B25I-E6T1U? A8: The response time of S-1142B25I-E6T1U is typically very fast, in the order of microseconds, allowing for quick detection and response to voltage changes.
Q9: Can multiple S-1142B25I-E6T1U ICs be used in parallel for redundancy? A9: Yes, multiple S-1142B25I-E6T1U ICs can be used in parallel to provide redundancy and increase the reliability of the voltage monitoring system.
Q10: Are there any specific application notes or reference designs available for S-1142B25I-E6T1U? A10: Yes, the manufacturer of S-1142B25I-E6T1U provides application notes and reference designs that can help in understanding its usage and implementing it in various technical solutions.
Please note that the answers provided here are general and may vary depending on the specific requirements and use cases. It is always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate and detailed information.