ABLIC U.S.A. Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
S-1142C32H-E6T2U
자세히보기 데이터시트

S-1142C32H-E6T2U

Basic Information Overview

Category: Integrated Circuit (IC)

Use: Voltage Regulator

Characteristics: - Low dropout voltage - High output voltage accuracy - Low quiescent current - Overcurrent protection - Thermal shutdown protection

Package: SOT-23-5

Essence: The S-1142C32H-E6T2U is a voltage regulator IC designed to provide a stable and regulated output voltage for various electronic devices.

Packaging/Quantity: The S-1142C32H-E6T2U is typically sold in reels containing 3000 units.

Specifications

  • Input Voltage Range: 2.0V to 6.0V
  • Output Voltage Range: 1.8V to 5.0V
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Output Current: 100mA (maximum)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1142C32H-E6T2U has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. CE: Chip enable pin
  4. VOUT: Output voltage pin
  5. NC: No connection pin

Functional Features

  • Low Dropout Voltage: The S-1142C32H-E6T2U exhibits a low dropout voltage, ensuring efficient power conversion even when the input voltage is close to the desired output voltage.
  • High Output Voltage Accuracy: This voltage regulator provides a high level of output voltage accuracy, ensuring stable and reliable operation of connected electronic devices.
  • Low Quiescent Current: With a low quiescent current, the S-1142C32H-E6T2U minimizes power consumption when the load is light or idle.
  • Overcurrent Protection: The IC incorporates overcurrent protection, safeguarding the connected circuitry from excessive current flow and potential damage.
  • Thermal Shutdown Protection: In case of excessive temperature rise, the S-1142C32H-E6T2U features thermal shutdown protection, preventing overheating and ensuring device longevity.

Advantages and Disadvantages

Advantages: - High output voltage accuracy - Low dropout voltage - Overcurrent and thermal protection - Low quiescent current for power efficiency

Disadvantages: - Limited maximum output current (100mA)

Working Principles

The S-1142C32H-E6T2U operates as a linear voltage regulator. It regulates the output voltage by maintaining a constant voltage drop across its internal pass transistor. When the input voltage exceeds the desired output voltage, the pass transistor adjusts its resistance to maintain a stable output voltage. The IC continuously monitors the output voltage and adjusts the pass transistor accordingly to ensure accurate regulation.

Detailed Application Field Plans

The S-1142C32H-E6T2U finds applications in various electronic devices that require a stable and regulated power supply. Some common application fields include: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - Battery-powered devices

Detailed and Complete Alternative Models

  1. S-1132Bxx-I6T1U: Similar voltage regulator IC with higher output current capability (up to 300mA).
  2. S-1112Bxx-N4T1U: Voltage regulator IC with adjustable output voltage and higher input voltage range.
  3. S-1172Bxx-U5T1G: Ultra-low dropout voltage regulator IC suitable for applications with tight voltage margin requirements.

These alternative models offer different specifications and features, allowing designers to choose the most suitable voltage regulator for their specific application needs.

Word count: 440 words

기술 솔루션에 S-1142C32H-E6T2U 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of S-1142C32H-E6T2U in technical solutions:

  1. Q: What is the S-1142C32H-E6T2U? A: The S-1142C32H-E6T2U is a voltage detector IC (Integrated Circuit) manufactured by a specific company.

  2. Q: What is the purpose of the S-1142C32H-E6T2U? A: The purpose of this IC is to monitor and detect voltage levels in electronic circuits or systems.

  3. Q: How does the S-1142C32H-E6T2U work? A: It works by comparing the input voltage with a reference voltage, and when the input voltage crosses a certain threshold, it triggers an output signal.

  4. Q: What is the voltage range that the S-1142C32H-E6T2U can detect? A: The S-1142C32H-E6T2U can detect voltages within a specific range, typically mentioned in its datasheet. For example, it may be designed to detect voltages between 2.0V and 5.5V.

  5. Q: Can the S-1142C32H-E6T2U be used in battery-powered applications? A: Yes, it can be used in battery-powered applications as it has low power consumption and can operate within a wide voltage range.

  6. Q: What are some typical applications of the S-1142C32H-E6T2U? A: Some common applications include power management in portable devices, battery monitoring, overvoltage protection, and system reset functions.

  7. Q: Is the S-1142C32H-E6T2U suitable for automotive applications? A: Yes, it is suitable for automotive applications as it can withstand high temperatures and has built-in protection features.

  8. Q: Can the S-1142C32H-E6T2U be used in industrial control systems? A: Absolutely! It can be used in various industrial control systems where voltage monitoring and protection are required.

  9. Q: Does the S-1142C32H-E6T2U have any built-in safety features? A: Yes, it often includes features like overvoltage detection, thermal shutdown, and reverse polarity protection to ensure safe operation.

  10. Q: Where can I find more information about the S-1142C32H-E6T2U? A: You can refer to the datasheet provided by the manufacturer or visit their official website for detailed specifications, application notes, and technical support.

Please note that the specific details and answers may vary depending on the manufacturer and the product's documentation.