ABLIC U.S.A. Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
S-1165B30MC-N6PTFG
자세히보기 데이터시트

S-1165B30MC-N6PTFG

Product Overview

Category

S-1165B30MC-N6PTFG belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Maximum Output Current: 300mA
  • Dropout Voltage: 200mV (at 100mA)
  • Package Type: SOT-23-5
  • Essence: Low dropout linear voltage regulator

Packaging/Quantity

The S-1165B30MC-N6PTFG is typically packaged in reels and comes in quantities of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Output Current: 300mA (maximum)
  • Dropout Voltage: 200mV (at 100mA)
  • Line Regulation: ±0.1% (typical)
  • Load Regulation: ±0.2% (typical)
  • Quiescent Current: 75μA (typical)
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: SOT-23-5

Detailed Pin Configuration

The S-1165B30MC-N6PTFG has a total of five pins:

  1. VIN: Input voltage pin.
  2. GND: Ground pin.
  3. EN: Enable pin.
  4. VOUT: Output voltage pin.
  5. NC: No connection pin.

Functional Features

  • Low dropout voltage: The S-1165B30MC-N6PTFG exhibits a low dropout voltage, ensuring efficient voltage regulation even when the input voltage is close to the desired output voltage.
  • Low quiescent current: The regulator has a low quiescent current, minimizing power consumption in standby or idle modes.
  • Short-circuit protection: The device incorporates short-circuit protection, safeguarding against potential damage caused by excessive current flow.

Advantages and Disadvantages

Advantages

  • Wide input voltage range allows for compatibility with various power sources.
  • Low dropout voltage ensures efficient voltage regulation.
  • Compact SOT-23-5 package enables space-saving integration into electronic circuits.
  • Short-circuit protection enhances device reliability.

Disadvantages

  • Maximum output current of 300mA may limit its use in high-power applications.
  • Limited output voltage range may not be suitable for certain specialized applications.

Working Principles

The S-1165B30MC-N6PTFG operates based on the principle of linear voltage regulation. It utilizes a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. This results in a stable output voltage regardless of variations in the input voltage.

Detailed Application Field Plans

The S-1165B30MC-N6PTFG finds application in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT (Internet of Things) devices - Embedded systems - Wearable devices

Detailed and Complete Alternative Models

  1. S-1165B30MC-N6PTEG
  2. S-1165B30MC-N6PTFH
  3. S-1165B30MC-N6PTFJ
  4. S-1165B30MC-N6PTFK
  5. S-1165B30MC-N6PTFL

These alternative models offer similar functionality and characteristics to the S-1165B30MC-N6PTFG, providing flexibility in design and compatibility with different system requirements.

In conclusion, the S-1165B30MC-N6PTFG is a voltage regulator that offers efficient voltage regulation, low dropout voltage, and short-circuit protection. It finds application in various electronic devices and systems, making it a versatile choice for designers.

기술 솔루션에 S-1165B30MC-N6PTFG 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of S-1165B30MC-N6PTFG in technical solutions:

  1. Question: What is S-1165B30MC-N6PTFG?
    Answer: S-1165B30MC-N6PTFG is a specific model or part number of a component used in technical solutions.

  2. Question: What is the purpose of S-1165B30MC-N6PTFG?
    Answer: The purpose of S-1165B30MC-N6PTFG is to perform a specific function within a technical solution, such as voltage regulation or power management.

  3. Question: What are the key features of S-1165B30MC-N6PTFG?
    Answer: Some key features of S-1165B30MC-N6PTFG may include low power consumption, high efficiency, overcurrent protection, and thermal shutdown.

  4. Question: In which applications can S-1165B30MC-N6PTFG be used?
    Answer: S-1165B30MC-N6PTFG can be used in various applications, including consumer electronics, industrial automation, automotive systems, and telecommunications.

  5. Question: What is the input voltage range for S-1165B30MC-N6PTFG?
    Answer: The input voltage range for S-1165B30MC-N6PTFG may vary, but it is typically designed to operate within a specific range, such as 2.7V to 5.5V.

  6. Question: What is the output voltage range of S-1165B30MC-N6PTFG?
    Answer: The output voltage range of S-1165B30MC-N6PTFG depends on the specific configuration or variant, but it is commonly designed to provide a stable output voltage, such as 3.3V.

  7. Question: Can S-1165B30MC-N6PTFG handle high current loads?
    Answer: Yes, S-1165B30MC-N6PTFG is typically designed to handle moderate to high current loads, depending on the specific variant and thermal considerations.

  8. Question: Is S-1165B30MC-N6PTFG compatible with other components or microcontrollers?
    Answer: Yes, S-1165B30MC-N6PTFG is designed to be compatible with various components and microcontrollers commonly used in technical solutions.

  9. Question: Does S-1165B30MC-N6PTFG have any built-in protection features?
    Answer: Yes, S-1165B30MC-N6PTFG often includes built-in protection features such as overcurrent protection, thermal shutdown, and short-circuit protection.

  10. Question: Where can I find more detailed information about S-1165B30MC-N6PTFG?
    Answer: You can refer to the datasheet or technical documentation provided by the manufacturer of S-1165B30MC-N6PTFG for more detailed information regarding its specifications, application notes, and recommended usage guidelines.