ABLIC U.S.A. Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
S-1167B19-I6T2U
자세히보기 데이터시트

S-1167B19-I6T2U

Basic Information Overview

  • Category: Electronic Component
  • Use: Voltage Regulator
  • Characteristics: High Efficiency, Low Dropout Voltage
  • Package: SOT-23-5
  • Essence: Regulates voltage to a stable level
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.0V
  • Maximum Output Current: 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 50µA (typical)

Detailed Pin Configuration

  1. GND (Ground)
  2. VIN (Input Voltage)
  3. VOUT (Output Voltage)
  4. NC (No Connection)
  5. EN (Enable)

Functional Features

  • High efficiency conversion of input voltage to output voltage
  • Low dropout voltage ensures stable output even with low input voltage
  • Enable pin allows for easy on/off control of the regulator
  • Overcurrent and thermal protection for safe operation

Advantages

  • Compact SOT-23-5 package saves board space
  • Wide input voltage range accommodates various power sources
  • Low quiescent current minimizes power consumption in standby mode
  • Excellent line and load regulation for consistent performance

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications
  • Dropout voltage may cause some power loss in low input voltage scenarios

Working Principles

The S-1167B19-I6T2U is a voltage regulator that operates by comparing the output voltage to a reference voltage. It adjusts the resistance in the circuit to maintain a stable output voltage, regardless of changes in the input voltage or load conditions. The enable pin allows the user to control the regulator's operation, providing flexibility in power management.

Detailed Application Field Plans

  • Battery-powered devices: Provides a stable voltage supply for portable electronics
  • IoT devices: Ensures consistent power delivery to connected sensors and modules
  • Automotive applications: Regulates voltage for various components in vehicles
  • Industrial equipment: Maintains stable voltage levels in control systems

Detailed and Complete Alternative Models

  1. S-1167B18-I6T2U: Similar specifications, but with a lower dropout voltage
  2. S-1167B20-I6T2U: Similar specifications, but with a higher maximum output current
  3. S-1167B19-I6T2V: Same specifications, but in a different package (SOT-89-5)

(Note: These alternative models are provided as examples and may not cover all available options.)

This entry provides an overview of the S-1167B19-I6T2U voltage regulator, including its basic information, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models. With its high efficiency and low dropout voltage, this component is suitable for a wide range of electronic applications.

기술 솔루션에 S-1167B19-I6T2U 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of S-1167B19-I6T2U in technical solutions:

  1. Q: What is S-1167B19-I6T2U? A: S-1167B19-I6T2U is a specific model or component used in technical solutions, typically in electronic devices.

  2. Q: What are the main features of S-1167B19-I6T2U? A: The main features of S-1167B19-I6T2U include [list the key features such as voltage range, current capacity, etc.].

  3. Q: How can S-1167B19-I6T2U be applied in technical solutions? A: S-1167B19-I6T2U can be applied in various technical solutions such as [provide examples like power management systems, battery charging circuits, etc.].

  4. Q: What are the advantages of using S-1167B19-I6T2U in technical solutions? A: Some advantages of using S-1167B19-I6T2U include [mention benefits like high efficiency, compact size, low power consumption, etc.].

  5. Q: Are there any limitations or considerations when using S-1167B19-I6T2U? A: Yes, some limitations or considerations when using S-1167B19-I6T2U may include [mention factors like temperature range, input/output requirements, etc.].

  6. Q: Can S-1167B19-I6T2U be easily integrated into existing technical solutions? A: Yes, S-1167B19-I6T2U is designed for easy integration and compatibility with various technical solutions.

  7. Q: Is S-1167B19-I6T2U suitable for both industrial and consumer applications? A: Yes, S-1167B19-I6T2U is versatile and can be used in both industrial and consumer applications.

  8. Q: What certifications or standards does S-1167B19-I6T2U comply with? A: S-1167B19-I6T2U complies with [mention relevant certifications or standards like RoHS, ISO, etc.].

  9. Q: Can S-1167B19-I6T2U be customized or modified for specific technical requirements? A: Depending on the manufacturer, customization options may be available for S-1167B19-I6T2U to meet specific technical requirements.

  10. Q: Where can I purchase S-1167B19-I6T2U for my technical solution? A: S-1167B19-I6T2U can be purchased from authorized distributors or directly from the manufacturer's website.