ABLIC U.S.A. Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
S-1170B54PD-OUNTFG
자세히보기 데이터시트

S-1170B54PD-OUNTFG

Introduction

The S-1170B54PD-OUNTFG is a voltage regulator belonging to the category of electronic components. This device is commonly used in various electronic applications due to its specific characteristics and functional features.

Basic Information Overview

  • Category: Electronic Components
  • Use: Voltage Regulation
  • Characteristics: High precision, low dropout voltage, low quiescent current
  • Package: DFN(PLP)2525-10
  • Essence: Voltage regulation for electronic circuits
  • Packaging/Quantity: Tape & Reel (3000 pcs/reel)

Specifications

  • Input Voltage Range: 2.0V to 6.0V
  • Output Voltage Range: 0.8V to 5.0V
  • Output Current: 1.0A
  • Dropout Voltage: 160mV @ 1.0A
  • Quiescent Current: 30μA (TYP.)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1170B54PD-OUNTFG has a standard pin configuration with input, output, and ground pins. The detailed pin configuration is as follows: - Pin 1: VIN (Input Voltage) - Pin 2: GND (Ground) - Pin 3: VOUT (Output Voltage)

Functional Features

  • High Precision: Provides accurate and stable output voltage regulation.
  • Low Dropout Voltage: Ensures efficient operation even with small voltage differentials.
  • Low Quiescent Current: Minimizes power consumption during standby or idle modes.

Advantages and Disadvantages

Advantages

  • Reliable voltage regulation
  • Compact package size
  • Wide operating temperature range

Disadvantages

  • Limited output current capacity
  • Not suitable for high-power applications

Working Principles

The S-1170B54PD-OUNTFG operates based on the principle of feedback control, where it compares the actual output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output.

Detailed Application Field Plans

This voltage regulator is widely used in portable electronic devices, battery-powered systems, IoT devices, and other applications requiring precise voltage regulation within a limited input voltage range.

Detailed and Complete Alternative Models

  • S-1170 Series: Offers a range of voltage regulators with varying input/output voltage specifications.
  • S-1112 Series: Provides similar voltage regulation capabilities with different package options.

In conclusion, the S-1170B54PD-OUNTFG is a reliable voltage regulator suitable for low-power electronic applications, offering high precision and efficiency within a compact form factor.

[Word Count: 345]

기술 솔루션에 S-1170B54PD-OUNTFG 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is S-1170B54PD-OUNTFG?

    • S-1170B54PD-OUNTFG is a voltage regulator IC (integrated circuit) manufactured by Seiko Instruments. It is designed to provide stable power supply voltage for various electronic devices.

  2. What are the key features of S-1170B54PD-OUNTFG?

    • The key features include a wide input voltage range, low dropout voltage, high output voltage accuracy, and overcurrent protection.

  3. How can S-1170B54PD-OUNTFG be used in technical solutions?

    • S-1170B54PD-OUNTFG can be used to regulate and stabilize the voltage supply in a wide range of electronic applications, such as battery-powered devices, IoT (Internet of Things) devices, and portable consumer electronics.

  4. What is the typical application circuit for S-1170B54PD-OUNTFG?

    • The typical application circuit includes input and output capacitors, resistors for setting the output voltage, and the IC itself connected according to the manufacturer's datasheet.

  5. What is the maximum output current of S-1170B54PD-OUNTFG?

    • The maximum output current is typically specified in the datasheet and depends on the specific operating conditions and thermal considerations.

  6. Does S-1170B54PD-OUNTFG require any external components for operation?

    • Yes, S-1170B54PD-OUNTFG requires input and output capacitors, as well as other passive components based on the specific application requirements.

  7. What are the recommended operating conditions for S-1170B54PD-OUNTFG?

    • The recommended operating conditions include a specified input voltage range, temperature range, and load conditions as outlined in the datasheet.

  8. Can S-1170B54PD-OUNTFG be used in automotive applications?

    • S-1170B54PD-OUNTFG may have automotive-grade versions available, but it's important to check the specific product documentation for automotive qualification and suitability.

  9. What are the potential challenges when using S-1170B54PD-OUNTFG in a design?

    • Potential challenges may include thermal management, PCB layout considerations, and ensuring proper input and output capacitor selection for stability.

  10. Where can I find more detailed information about S-1170B54PD-OUNTFG?

    • More detailed information can be found in the product datasheet, application notes, and technical support resources provided by Seiko Instruments or authorized distributors.