S-1172B43-E6T1G
Product Overview
Category
The S-1172B43-E6T1G belongs to the category of voltage regulators.
Use
It is used to regulate and stabilize voltage in electronic circuits.
Characteristics
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage Range: 0.8V to 5.0V
- Low Dropout Voltage: 160mV @ 150mA
- High Ripple Rejection: 75dB @ 1kHz
- Current Limit Circuit
- Thermal Shutdown Circuit
- Short Circuit Protection Circuit
Package
The S-1172B43-E6T1G comes in a small surface-mount package.
Essence
The essence of this product lies in its ability to provide stable and regulated voltage for various electronic applications.
Packaging/Quantity
It is typically packaged in reels with a quantity of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage Range: 0.8V to 5.0V
- Maximum Output Current: 150mA
- Dropout Voltage: 160mV @ 150mA
- Ripple Rejection: 75dB @ 1kHz
- Operating Temperature Range: -40°C to 85°C
Detailed Pin Configuration
The detailed pin configuration of the S-1172B43-E6T1G is as follows: 1. VIN (Input Voltage) 2. GND (Ground) 3. VOUT (Output Voltage)
Functional Features
- Voltage Regulation
- Current Limiting
- Thermal Shutdown Protection
- Short Circuit Protection
Advantages and Disadvantages
Advantages
- Wide input voltage range
- Low dropout voltage
- High ripple rejection
- Integrated protection circuits
Disadvantages
- Limited maximum output current
- Restricted operating temperature range
Working Principles
The S-1172B43-E6T1G operates by comparing the output voltage to a reference voltage and adjusting the pass element to maintain a stable output voltage despite changes in input voltage and load conditions. The integrated protection circuits ensure safe operation under various fault conditions.
Detailed Application Field Plans
The S-1172B43-E6T1G is suitable for a wide range of applications, including: - Battery-powered devices - Portable electronics - IoT devices - Consumer electronics - Industrial control systems
Detailed and Complete Alternative Models
Some alternative models to the S-1172B43-E6T1G include: - S-1172B33-E6T1U - S-1172B50-E6T1U - S-1172B25-E6T1U
In conclusion, the S-1172B43-E6T1G is a versatile voltage regulator with a wide input voltage range, low dropout voltage, and integrated protection features, making it suitable for various electronic applications.
[Word Count: 452]
기술 솔루션에 S-1172B43-E6T1G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure, here are 10 common questions and answers related to the application of S-1172B43-E6T1G in technical solutions:
What is the typical application of S-1172B43-E6T1G?
- The S-1172B43-E6T1G is commonly used as a voltage regulator in various electronic devices such as mobile phones, tablets, and other portable consumer electronics.
What is the input voltage range for S-1172B43-E6T1G?
- The input voltage range for S-1172B43-E6T1G is typically between 2.5V to 16V.
What is the output voltage range for S-1172B43-E6T1G?
- The output voltage range for S-1172B43-E6T1G is typically between 0.8V to 6.0V.
What is the maximum output current of S-1172B43-E6T1G?
- The maximum output current of S-1172B43-E6T1G is typically around 1A.
What are the key features of S-1172B43-E6T1G?
- Some key features of S-1172B43-E6T1G include low dropout voltage, low quiescent current, and overcurrent protection.
Can S-1172B43-E6T1G be used in automotive applications?
- Yes, S-1172B43-E6T1G is suitable for use in automotive applications, provided it meets the necessary automotive standards and requirements.
Is S-1172B43-E6T1G suitable for battery-powered devices?
- Yes, S-1172B43-E6T1G is well-suited for battery-powered devices due to its low quiescent current and efficient power conversion.
What are the typical thermal considerations for S-1172B43-E6T1G?
- It is important to consider proper heat sinking and thermal management for S-1172B43-E6T1G, especially when operating at higher ambient temperatures or under heavy load conditions.
Are there any specific layout guidelines for using S-1172B43-E6T1G?
- Yes, following recommended layout guidelines, such as minimizing trace lengths and providing adequate decoupling capacitors, can help optimize the performance of S-1172B43-E6T1G.
Where can I find more detailed technical information about S-1172B43-E6T1G?
- Detailed technical information about S-1172B43-E6T1G can be found in the product datasheet provided by the manufacturer or on their official website.