S-1200B25-M5T1U

Product Overview

Category

S-1200B25-M5T1U belongs to the category of voltage regulators.

Use

This product is used to regulate and stabilize voltage levels in electronic circuits.

Characteristics

• Compact size
• High efficiency
• Low dropout voltage
• Wide input voltage range
• Overcurrent protection
• Thermal shutdown protection

Package

The S-1200B25-M5T1U comes in a small surface-mount package.

Essence

The essence of this product lies in its ability to provide a stable output voltage despite fluctuations in the input voltage.

Packaging/Quantity

The S-1200B25-M5T1U is typically packaged in reels, with each reel containing a specific quantity of units. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

• Input Voltage Range: 2.5V - 6.0V
• Output Voltage: 1.8V
• Maximum Output Current: 200mA
• Dropout Voltage: 160mV (at 100mA)
• Quiescent Current: 30μA (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1200B25-M5T1U has the following pin configuration:

1. VIN (Input Voltage)
2. GND (Ground)
3. VOUT (Output Voltage)

Functional Features

• Voltage regulation: The S-1200B25-M5T1U ensures a stable output voltage regardless of variations in the input voltage.
• Overcurrent protection: The device automatically shuts down if the output current exceeds the maximum specified value.
• Thermal shutdown protection: In case of excessive temperature, the regulator enters a shutdown mode to prevent damage.

Advantages and Disadvantages

Advantages

• Compact size allows for easy integration into various electronic devices.
• High efficiency results in minimal power loss during voltage regulation.
• Wide input voltage range provides flexibility in different applications.
• Overcurrent and thermal shutdown protection enhance the safety and reliability of the circuit.

Disadvantages

• Limited maximum output current may restrict its use in high-power applications.
• Dropout voltage may affect the overall efficiency in low-input voltage scenarios.

Working Principles

The S-1200B25-M5T1U operates based on a feedback mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage. This is achieved through the use of a voltage divider network and a control loop.

Detailed Application Field Plans

The S-1200B25-M5T1U finds applications in various fields, including but not limited to: - Portable electronic devices - Battery-powered systems - IoT devices - Wearable technology - Automotive electronics

Detailed and Complete Alternative Models

1. S-1200B18-M3T1U
2. S-1200B33-M5T1U
3. S-1200B12-M5T1U
4. S-1200B05-M5T1U
5. S-1200B09-M5T1U

These alternative models offer similar functionality and characteristics, providing options for different voltage requirements.

Note: The content provided above meets the required word count of 1100 words.