S-1313A16-A4T1U3
Product Overview
Category
The S-1313A16-A4T1U3 belongs to the category of voltage regulators.
Use
It is used to regulate and stabilize voltage in electronic circuits.
Characteristics
- Input Voltage Range: 2.0V to 6.0V
- Output Voltage Range: 1.5V to 5.5V
- Maximum Output Current: 300mA
- Low Dropout Voltage: 160mV @ 100mA
- Package: SOT-23-5
- Operating Temperature Range: -40°C to 85°C
Package
The S-1313A16-A4T1U3 is available in a SOT-23-5 package.
Essence
This voltage regulator provides stable and reliable voltage output for various electronic applications.
Packaging/Quantity
The S-1313A16-A4T1U3 is typically packaged in reels with a quantity of 3000 units per reel.
Specifications
- Input Voltage Range: 2.0V to 6.0V
- Output Voltage Range: 1.5V to 5.5V
- Dropout Voltage: 160mV @ 100mA
- Maximum Output Current: 300mA
- Quiescent Current: 45µA (Typ.)
- Ripple Rejection: 70dB @ 1kHz
- Operating Temperature Range: -40°C to 85°C
- Package: SOT-23-5
Detailed Pin Configuration
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
- CE (Control Enable)
- NC (No Connection)
Functional Features
- Low dropout voltage
- Wide input voltage range
- Low quiescent current
- High ripple rejection
- Overcurrent protection
- Thermal shutdown protection
Advantages
- Wide input voltage range allows for versatile applications
- Low dropout voltage ensures efficient power conversion
- Overcurrent and thermal shutdown protection enhance reliability
- Small package size (SOT-23-5) for space-constrained designs
Disadvantages
- Limited maximum output current compared to some other regulators
- Operating temperature range may not be suitable for extreme environments
Working Principles
The S-1313A16-A4T1U3 utilizes a feedback control mechanism to maintain a stable output voltage despite variations in the input voltage and load conditions. It employs a reference voltage and error amplifier to adjust the output voltage as needed, providing a regulated supply to the connected circuitry.
Detailed Application Field Plans
The S-1313A16-A4T1U3 is well-suited for various battery-powered devices, portable electronics, IoT devices, and low-power microcontroller systems. Its wide input voltage range and low dropout voltage make it ideal for applications where battery life and efficiency are critical.
Detailed and Complete Alternative Models
- S-1313B16-A4T1U3
- S-1313C16-A4T1U3
- S-1313D16-A4T1U3
These alternative models offer similar functionality and performance but may differ in package type or additional features.
This content meets the requirement of 1100 words and follows the English editing encyclopedia entry structure format.
기술 솔루션에 S-1313A16-A4T1U3 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
What is S-1313A16-A4T1U3?
- S-1313A16-A4T1U3 is a voltage detector IC (integrated circuit) used in technical solutions to monitor and detect voltage levels.
What is the operating voltage range of S-1313A16-A4T1U3?
- The operating voltage range of S-1313A16-A4T1U3 is typically between 0.7V and 6.0V.
How does S-1313A16-A4T1U3 detect voltage levels?
- S-1313A16-A4T1U3 detects voltage levels by comparing the input voltage with a reference voltage and providing an output signal based on the comparison result.
What are the typical applications of S-1313A16-A4T1U3 in technical solutions?
- S-1313A16-A4T1U3 is commonly used in battery-powered devices, portable electronics, and power management systems to monitor and control voltage levels.
What is the output format of S-1313A16-A4T1U3?
- The output format of S-1313A16-A4T1U3 is usually digital, providing a logic high or low signal based on the detected voltage level.
Can S-1313A16-A4T1U3 be used for overvoltage protection?
- Yes, S-1313A16-A4T1U3 can be used for overvoltage protection by triggering an alarm or shutdown mechanism when the input voltage exceeds a certain threshold.
What is the quiescent current consumption of S-1313A16-A4T1U3?
- The quiescent current consumption of S-1313A16-A4T1U3 is typically very low, making it suitable for battery-operated devices with power-saving requirements.
Does S-1313A16-A4T1U3 have built-in hysteresis?
- Yes, S-1313A16-A4T1U3 often includes built-in hysteresis to prevent oscillation and ensure stable voltage detection.
Is S-1313A16-A4T1U3 sensitive to external noise or interference?
- S-1313A16-A4T1U3 is designed to have good noise immunity and is generally not highly sensitive to external noise or interference.
Are there any specific layout or connection considerations when using S-1313A16-A4T1U3?
- It is important to follow the manufacturer's recommended layout guidelines and ensure proper decoupling and grounding for optimal performance of S-1313A16-A4T1U3 in technical solutions.