S-1313C25-N4T1U3
Introduction
The S-1313C25-N4T1U3 is a voltage regulator belonging to the category of electronic components. This device is commonly used in various electronic applications due to its unique characteristics and functional features.
Basic Information Overview
- Category: Voltage Regulator
- Use: Regulating voltage in electronic circuits
- Characteristics: High precision, low dropout voltage, low quiescent current
- Package: SOT-23-5 package
- Essence: Providing stable voltage output for electronic devices
- Packaging/Quantity: Typically supplied in reels of 3000 units
Specifications
- Input Voltage Range: 2.0V to 6.0V
- Output Voltage: 2.5V
- Maximum Output Current: 150mA
- Dropout Voltage: 160mV @ 100mA
- Quiescent Current: 30μA (TYP.)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-1313C25-N4T1U3 has the following pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. CE (Control Enable) 4. VOUT (Output Voltage) 5. NC (No Connection)
Functional Features
- High Precision: Provides accurate and stable output voltage.
- Low Dropout Voltage: Ensures efficient operation even with small input-output differentials.
- Low Quiescent Current: Minimizes power consumption during standby or idle modes.
Advantages and Disadvantages
Advantages
- Reliable voltage regulation
- Compact SOT-23-5 package
- Wide operating temperature range
Disadvantages
- Limited maximum output current
- Requires external capacitors for stability
Working Principles
The S-1313C25-N4T1U3 operates by comparing the reference voltage with the feedback voltage and adjusting the pass transistor to maintain a constant output voltage. When the input voltage fluctuates, the regulator responds by modulating the pass transistor to stabilize the output voltage.
Detailed Application Field Plans
This voltage regulator is widely used in portable electronic devices, battery-powered systems, and low-power applications where a stable voltage supply is essential. It is suitable for handheld consumer electronics, IoT devices, and sensor modules.
Detailed and Complete Alternative Models
- S-1313C25-A4T1U3
- S-1313C25-B4T1U3
- S-1313C25-C4T1U3
In summary, the S-1313C25-N4T1U3 voltage regulator offers precise and reliable voltage regulation in a compact package, making it an ideal choice for various electronic applications.
[Word Count: 398]
기술 솔루션에 S-1313C25-N4T1U3 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
What is S-1313C25-N4T1U3?
- S-1313C25-N4T1U3 is a voltage regulator IC (integrated circuit) commonly used in electronic devices to regulate and stabilize the voltage supply.
What is the input voltage range for S-1313C25-N4T1U3?
- The input voltage range for S-1313C25-N4T1U3 is typically between 2.0V to 6.0V.
What is the output voltage of S-1313C25-N4T1U3?
- The output voltage of S-1313C25-N4T1U3 is fixed at 2.5V.
What is the maximum output current of S-1313C25-N4T1U3?
- The maximum output current of S-1313C25-N4T1U3 is around 150mA.
What are the typical applications of S-1313C25-N4T1U3?
- S-1313C25-N4T1U3 is commonly used in battery-powered devices, portable electronics, and other applications requiring stable voltage regulation.
Does S-1313C25-N4T1U3 require external components for operation?
- Yes, S-1313C25-N4T1U3 typically requires input and output capacitors for stable operation.
Is S-1313C25-N4T1U3 suitable for low-power applications?
- Yes, S-1313C25-N4T1U3 is designed for low-power applications due to its low quiescent current and efficient voltage regulation.
What are the key features of S-1313C25-N4T1U3?
- Some key features of S-1313C25-N4T1U3 include overcurrent protection, thermal shutdown, and a small package size.
Can S-1313C25-N4T1U3 be used in automotive applications?
- Yes, S-1313C25-N4T1U3 is suitable for automotive applications, provided it meets the necessary automotive standards and requirements.
Where can I find the detailed datasheet for S-1313C25-N4T1U3?
- The detailed datasheet for S-1313C25-N4T1U3 can be found on the manufacturer's website or through authorized distributors.