S-1315B13-A6T2U3

Product Overview

Category

S-1315B13-A6T2U3 belongs to the category of voltage regulators.

Use

This product is used for regulating voltage in electronic circuits.

Characteristics

• Compact size
• High efficiency
• Low power consumption
• Wide input voltage range
• Adjustable output voltage
• Overcurrent protection
• Thermal shutdown protection

Package

The S-1315B13-A6T2U3 comes in a small surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

The S-1315B13-A6T2U3 is typically packaged in reels and is available in quantities of 3000 units per reel.

Specifications

• Input Voltage Range: 2.0V to 6.0V
• Output Voltage Range: 1.0V to 4.5V (adjustable)
• Output Current: Up to 150mA
• Dropout Voltage: 200mV (typical)
• Quiescent Current: 35µA (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1315B13-A6T2U3 has the following pin configuration:

1. VIN: Input voltage pin
2. GND: Ground pin
3. VOUT: Output voltage pin
4. CE: Chip enable pin

Functional Features

• Voltage regulation: The S-1315B13-A6T2U3 ensures a stable output voltage regardless of input voltage fluctuations.
• Overcurrent protection: The device automatically shuts down if the output current exceeds the specified limit, protecting both the regulator and the connected circuitry.
• Thermal shutdown protection: In case of excessive temperature, the device shuts down to prevent damage.

Advantages and Disadvantages

Advantages

• Small size allows for easy integration into compact electronic devices.
• High efficiency results in minimal power loss.
• Wide input voltage range makes it suitable for various applications.
• Adjustable output voltage provides flexibility.
• Overcurrent and thermal shutdown protection enhance reliability.

Disadvantages

• Limited output current may not be sufficient for high-power applications.
• Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

The S-1315B13-A6T2U3 operates based on a feedback control mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage.

Detailed Application Field Plans

The S-1315B13-A6T2U3 is commonly used in the following applications:

1. Battery-powered devices: Provides regulated voltage to ensure consistent performance even as the battery voltage decreases.
2. Portable electronics: Enables efficient power management in smartphones, tablets, and other portable devices.
3. IoT devices: Suitable for low-power IoT applications where space and power consumption are critical factors.
4. Wearable devices: Compact size and low power consumption make it ideal for wearable technology.

Detailed and Complete Alternative Models

1. S-1315B13-A6T2U2: Similar to S-1315B13-A6T2U3 but with a fixed output voltage of 3.3V.
2. S-1315B13-A6T2U4: Similar to S-1315B13-A6T2U3 but with a higher output current capability of 300mA.
3. S-1315B13-A6T2U5: Similar to S-1315B13-A6T2U3 but with a wider input voltage range of 2.7V to 6.5V.

These alternative models offer variations in output voltage, current capacity, and input voltage range to cater to different application requirements.

Word count: 536 words