ABLIC U.S.A. Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
S-1315C33-A6T2U3
자세히보기 데이터시트

S-1315C33-A6T2U3

Basic Information Overview

Category: Integrated Circuit (IC)

Use: Voltage Regulator

Characteristics: - Low dropout voltage - High output voltage accuracy - Low quiescent current - Overcurrent protection - Thermal shutdown protection

Package: SOT-23-5

Essence: The S-1315C33-A6T2U3 is a voltage regulator IC that provides a stable output voltage for various electronic devices.

Packaging/Quantity: The S-1315C33-A6T2U3 is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.0V to 6.0V
  • Output Voltage: 3.3V ±2%
  • Maximum Output Current: 150mA
  • Dropout Voltage: 160mV @ 100mA
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1315C33-A6T2U3 has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. NC (No Connection)
  4. VOUT (Output Voltage)
  5. EN (Enable)

Functional Features

  • Low dropout voltage ensures efficient power conversion even when the input voltage is close to the desired output voltage.
  • High output voltage accuracy provides a stable and reliable power supply for sensitive electronic components.
  • Low quiescent current minimizes power consumption during standby or idle modes.
  • Overcurrent protection safeguards the IC and connected devices from excessive current flow.
  • Thermal shutdown protection prevents the IC from overheating, ensuring its longevity and reliability.

Advantages and Disadvantages

Advantages: - Compact SOT-23-5 package allows for easy integration into space-constrained designs. - Wide input voltage range enables compatibility with various power sources. - Excellent output voltage accuracy ensures consistent performance of connected devices. - Low quiescent current helps prolong battery life in portable applications.

Disadvantages: - Limited maximum output current may not be suitable for high-power applications. - Dropout voltage may cause a slight decrease in efficiency compared to other voltage regulators.

Working Principles

The S-1315C33-A6T2U3 is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage and adjusting the pass transistor accordingly to maintain a stable output voltage.

Detailed Application Field Plans

The S-1315C33-A6T2U3 is commonly used in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT (Internet of Things) devices - Wearable devices - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to the S-1315C33-A6T2U3 include: - S-1315 Series: Various output voltage options available - S-1312 Series: Lower dropout voltage, suitable for ultra-low power applications - S-1317 Series: Higher output current capability, suitable for higher power applications

These alternative models provide different specifications and features to cater to specific application requirements.

Word count: 398 words

기술 솔루션에 S-1315C33-A6T2U3 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is S-1315C33-A6T2U3?
    - S-1315C33-A6T2U3 is a voltage regulator IC commonly used in technical solutions to regulate voltage levels.

  2. What are the key features of S-1315C33-A6T2U3?
    - The key features of S-1315C33-A6T2U3 include low dropout voltage, low quiescent current, and overcurrent protection.

  3. How is S-1315C33-A6T2U3 typically used in technical solutions?
    - S-1315C33-A6T2U3 is often used to provide stable voltage output for various electronic devices and circuits.

  4. What is the input voltage range for S-1315C33-A6T2U3?
    - The input voltage range for S-1315C33-A6T2U3 is typically between 2.5V and 6.0V.

  5. What is the output voltage of S-1315C33-A6T2U3?
    - The output voltage of S-1315C33-A6T2U3 is fixed at 3.3V.

  6. Can S-1315C33-A6T2U3 handle high current loads?
    - Yes, S-1315C33-A6T2U3 is capable of handling moderate to high current loads, making it suitable for a wide range of applications.

  7. Does S-1315C33-A6T2U3 require external components for operation?
    - S-1315C33-A6T2U3 typically requires only a few external components, such as capacitors, for stable operation.

  8. Is S-1315C33-A6T2U3 suitable for battery-powered applications?
    - Yes, S-1315C33-A6T2U3's low dropout voltage and low quiescent current make it well-suited for battery-powered applications.

  9. What are the typical applications of S-1315C33-A6T2U3 in technical solutions?
    - S-1315C33-A6T2U3 is commonly used in portable devices, IoT devices, power management systems, and other electronic products.

  10. Are there any thermal considerations when using S-1315C33-A6T2U3?
    - It is important to consider thermal management when using S-1315C33-A6T2U3, especially if it is expected to operate under high ambient temperatures or handle significant power dissipation.