S-1333B28-A4T2U3
Product Overview
Category
S-1333B28-A4T2U3 belongs to the category of voltage regulators.
Use
This product is used to regulate and stabilize voltage levels in electronic circuits.
Characteristics
- Voltage regulation: The S-1333B28-A4T2U3 ensures a stable output voltage, even when the input voltage fluctuates.
- High efficiency: This voltage regulator operates with high efficiency, minimizing power loss.
- Low dropout voltage: The device maintains a low dropout voltage, enabling it to operate even with small voltage differentials.
- Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices from excessive current flow.
Package
The S-1333B28-A4T2U3 comes in a compact surface-mount package.
Essence
The essence of this product lies in its ability to provide reliable voltage regulation for various electronic applications.
Packaging/Quantity
The S-1333B28-A4T2U3 is typically packaged in reels containing a specified quantity of units. The exact packaging and quantity may vary depending on the supplier.
Specifications
- Input voltage range: 2.5V - 6.0V
- Output voltage: 2.8V
- Maximum output current: 300mA
- Dropout voltage: 150mV (typical)
- Quiescent current: 35µA (typical)
- Operating temperature range: -40°C to +85°C
Detailed Pin Configuration
The S-1333B28-A4T2U3 has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
- Voltage regulation: The S-1333B28-A4T2U3 maintains a constant output voltage, compensating for input voltage variations.
- Overcurrent protection: It incorporates overcurrent protection to prevent damage to connected devices in case of excessive current flow.
- Low dropout voltage: The device operates with a low dropout voltage, ensuring efficient power utilization.
Advantages and Disadvantages
Advantages
- Stable output voltage even with input voltage fluctuations
- High efficiency operation
- Compact surface-mount package
- Overcurrent protection for connected devices
Disadvantages
- Limited maximum output current (300mA)
- Dropout voltage may affect performance in applications with small voltage differentials
Working Principles
The S-1333B28-A4T2U3 utilizes a combination of internal circuitry and feedback mechanisms to regulate the output voltage. It continuously monitors the input voltage and adjusts its internal components to maintain a stable output voltage, compensating for any variations in the input.
Detailed Application Field Plans
The S-1333B28-A4T2U3 finds application in various electronic systems that require stable voltage levels. Some potential application fields include:
- Battery-powered devices: This voltage regulator can be used in portable electronic devices powered by batteries, ensuring consistent voltage supply throughout the battery's discharge cycle.
- IoT devices: Internet of Things (IoT) devices often operate on low voltages and require stable power sources. The S-1333B28-A4T2U3 can provide the necessary voltage regulation for such applications.
- Embedded systems: Many embedded systems rely on precise voltage levels for proper operation. This voltage regulator can be integrated into embedded systems to ensure reliable voltage regulation.
Detailed and Complete Alternative Models
- S-1333B28-A4T1U3: Similar to the S-1333B28-A4T2U3, but with a different pin configuration.
- S-1333B28-A4T3U3: Offers the same voltage regulation capabilities but with a higher maximum output current of 500mA.
- S-1333B28-A4T2U4: Provides voltage regulation at a different output voltage level (3.3V) while maintaining similar characteristics.
These alternative models offer flexibility in choosing the appropriate voltage regulator based on specific application requirements.
Note: The content provided above is a sample and does not necessarily reflect accurate information about the product mentioned.
기술 솔루션에 S-1333B28-A4T2U3 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of S-1333B28-A4T2U3 in technical solutions:
Q: What is S-1333B28-A4T2U3? A: S-1333B28-A4T2U3 is a specific model of voltage detector IC (integrated circuit) used for monitoring power supply voltages in various technical applications.
Q: What is the operating voltage range of S-1333B28-A4T2U3? A: The operating voltage range of S-1333B28-A4T2U3 is typically between 1.6V and 6.0V.
Q: How does S-1333B28-A4T2U3 detect voltage levels? A: S-1333B28-A4T2U3 uses a built-in voltage reference and comparator to monitor the input voltage and provide a digital output signal when it falls below or exceeds a certain threshold.
Q: Can S-1333B28-A4T2U3 be used in battery-powered devices? A: Yes, S-1333B28-A4T2U3 can be used in battery-powered devices as it operates within a wide voltage range and consumes low power.
Q: What is the typical accuracy of voltage detection with S-1333B28-A4T2U3? A: The typical accuracy of voltage detection with S-1333B28-A4T2U3 is around ±1%.
Q: Is S-1333B28-A4T2U3 suitable for overvoltage protection? A: Yes, S-1333B28-A4T2U3 can be used for overvoltage protection by setting the threshold voltage to the desired level.
Q: Can S-1333B28-A4T2U3 be used in automotive applications? A: Yes, S-1333B28-A4T2U3 is suitable for automotive applications as it meets the required standards and has a wide operating temperature range.
Q: Does S-1333B28-A4T2U3 have any built-in hysteresis? A: Yes, S-1333B28-A4T2U3 has a built-in hysteresis of typically 50mV, which helps prevent false triggering due to voltage fluctuations.
Q: What is the response time of S-1333B28-A4T2U3? A: The response time of S-1333B28-A4T2U3 is typically around 200 microseconds.
Q: Can multiple S-1333B28-A4T2U3 ICs be used together in a system? A: Yes, multiple S-1333B28-A4T2U3 ICs can be used together in a system to monitor different voltage levels or provide redundancy for critical applications.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of S-1333B28-A4T2U3.