S-13A1C10-E6T1U3

Basic Information Overview

• Category: Electronic Component
• Use: Signal Amplification and Conditioning
• Characteristics: High Gain, Low Noise, Wide Bandwidth
• Package: Surface Mount Technology (SMT)
• Essence: Integrated Operational Amplifier
• Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

• Supply Voltage: ±15V
• Input Offset Voltage: 2mV max
• Input Bias Current: 50nA max
• Gain Bandwidth Product: 10MHz min
• Slew Rate: 5V/µs min
• Output Current: 20mA min
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-13A1C10-E6T1U3 has a total of 8 pins. The pin configuration is as follows:

Pin 1: Inverting Input (-) Pin 2: Non-Inverting Input (+) Pin 3: Negative Power Supply (-Vcc) Pin 4: Positive Power Supply (+Vcc) Pin 5: Output Pin 6: Null Pin 7: Compensation Pin 8: Ground (GND)

Functional Features

• High voltage gain for signal amplification
• Low input offset voltage for accurate signal conditioning
• Wide bandwidth for handling high-frequency signals
• Low noise for improved signal quality
• High output current capability for driving loads

Advantages

• Excellent performance in amplifying weak signals
• Versatile application in various electronic circuits
• Compact surface mount package for space-saving designs
• Wide operating temperature range for different environments

Disadvantages

• Limited supply voltage range
• Requires careful consideration of input and output impedance matching
• Not suitable for high-power applications

Working Principles

The S-13A1C10-E6T1U3 is an integrated operational amplifier that amplifies and conditions electrical signals. It operates based on the principles of differential amplification, where the difference between the inverting and non-inverting inputs is amplified by a high gain factor. The output voltage is then determined by this amplified difference.

Detailed Application Field Plans

The S-13A1C10-E6T1U3 finds applications in various fields, including: 1. Audio Amplification: Used in audio equipment to amplify low-level audio signals. 2. Sensor Signal Conditioning: Used to amplify and condition signals from sensors such as temperature, pressure, or light sensors. 3. Communication Systems: Employed in signal conditioning circuits for wireless communication systems. 4. Instrumentation: Utilized in precision measurement instruments for accurate signal amplification. 5. Industrial Control Systems: Integrated into control circuits for industrial automation and process control.

Detailed and Complete Alternative Models

1. S-13B1C12-E6T1U3: Similar characteristics but with higher gain bandwidth product.
2. S-13A1C10-E6T2U3: Same characteristics but with different packaging options.
3. S-13A1C10-E6T1U4: Similar characteristics but with lower input offset voltage.

(Note: These alternative models are provided for reference and may have slight variations in specifications.)

This entry provides a comprehensive overview of the S-13A1C10-E6T1U3, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.