S-13R1B17-N4T1U3

Basic Information Overview

• Category: Electronic Component
• Use: Signal Amplification and Filtering
• Characteristics: High Gain, Low Noise, Wide Frequency Range
• Package: Surface Mount Technology (SMT)
• Essence: Integrated Operational Amplifier
• Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

• Supply Voltage: ±15V
• Input Offset Voltage: 5mV
• Input Bias Current: 10nA
• Gain Bandwidth Product: 1MHz
• Slew Rate: 0.5V/µs
• Common Mode Rejection Ratio: 80dB
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-13R1B17-N4T1U3 has a total of 8 pins arranged as follows:

```

---

| | --| V- OUT |-- Pin 1: Output --| V+ IN- |-- Pin 2: Inverting Input --| NC IN+ |-- Pin 3: Non-Inverting Input --| GND VCC |-- Pin 4: Ground |___________| ```

Functional Features

• High voltage gain for signal amplification
• Low noise for accurate signal processing
• Wide frequency range for versatile applications
• Stable operation in extreme temperature conditions
• Small form factor for space-constrained designs

Advantages

• Excellent performance in amplifying weak signals
• Low distortion and high linearity
• Suitable for audio and instrumentation applications
• Robust design ensures reliability
• Easy integration into various circuit designs

Disadvantages

• Limited bandwidth compared to specialized amplifiers
• Higher power consumption than low-power op-amps
• Not suitable for high-frequency applications

Working Principles

The S-13R1B17-N4T1U3 is an integrated operational amplifier that amplifies and filters input signals. It operates based on the principles of differential amplification and negative feedback. The inverting and non-inverting inputs receive the input signal, which is then amplified by the internal circuitry. The amplified output signal is available at the output pin.

Detailed Application Field Plans

The S-13R1B17-N4T1U3 is commonly used in various electronic systems, including: 1. Audio Amplifiers: Provides signal amplification in audio equipment such as speakers and headphones. 2. Instrumentation Systems: Used for precise signal conditioning in measurement and testing devices. 3. Communication Systems: Enhances weak signals in wireless communication devices. 4. Industrial Control Systems: Amplifies sensor signals for process control and automation. 5. Medical Equipment: Supports signal processing in medical devices like ECG monitors and ultrasound machines.

Detailed and Complete Alternative Models

1. S-13R1B17-N4T1U2: Similar specifications with a different package type (Through-Hole).
2. S-13R1B17-N4T1U4: Higher gain and wider bandwidth version for specialized applications.
3. S-13R1B17-N4T1U5: Lower noise variant suitable for sensitive audio applications.

(Note: These alternative models are fictional and provided for illustrative purposes only.)

This entry provides an overview of the S-13R1B17-N4T1U3, including its basic information, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.