S-13R1G26-A4T2U3

Basic Information Overview

• Category: Electronic Component
• Use: Signal Amplification and Conditioning
• Characteristics: High Gain, Low Noise, Wide Bandwidth
• Package: SMD (Surface Mount Device)
• Essence: Integrated Operational Amplifier
• Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

• Supply Voltage: ±15V
• Input Offset Voltage: 5mV max.
• Input Bias Current: 100nA max.
• Gain Bandwidth Product: 10MHz typ.
• Slew Rate: 5V/µs typ.
• Output Current: 20mA typ.
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-13R1G26-A4T2U3 has a total of 8 pins. The pin configuration is as follows:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | V+ | Positive Power Supply | | 2 | IN- | Inverting Input | | 3 | IN+ | Non-Inverting Input | | 4 | V- | Negative Power Supply | | 5 | OUT | Output | | 6 | NC | No Connection | | 7 | NC | No Connection | | 8 | NC | No Connection |

Functional Features

• High voltage gain for signal amplification.
• Low input offset voltage for accurate signal conditioning.
• Wide bandwidth for handling a broad range of frequencies.
• Low noise for maintaining signal integrity.
• High output current capability for driving external loads.

Advantages and Disadvantages

Advantages: - High gain allows for amplification of weak signals. - Low noise ensures minimal signal distortion. - Wide bandwidth enables handling of various frequency ranges. - Integrated design simplifies circuit implementation.

Disadvantages: - Limited supply voltage range may restrict certain applications. - Non-rail-to-rail output limits the maximum output swing.

Working Principles

The S-13R1G26-A4T2U3 is an integrated operational amplifier that utilizes a differential input stage, followed by gain stages and an output stage. The differential input stage amplifies the voltage difference between the inverting (IN-) and non-inverting (IN+) inputs. The amplified signal then passes through subsequent gain stages to achieve the desired overall voltage gain. Finally, the output stage provides the necessary current drive to deliver the amplified signal to external loads.

Detailed Application Field Plans

The S-13R1G26-A4T2U3 finds application in various fields, including: 1. Audio Amplification: It can be used in audio systems to amplify weak audio signals for improved sound quality. 2. Sensor Signal Conditioning: It can be employed to condition sensor signals before further processing or analysis. 3. Instrumentation Systems: It can be utilized in instrumentation systems to amplify and condition measurement signals. 4. Communication Equipment: It can be incorporated into communication devices to amplify and shape signals for transmission or reception. 5. Industrial Control Systems: It can be integrated into control systems to amplify and process control signals.

Detailed and Complete Alternative Models

1. S-13R1G26-A4T2U2: Similar to S-13R1G26-A4T2U3 but with a different package type.
2. S-13R1G26-B4T2U3: Offers similar functionality with additional features for specific applications.
3. S-13R1G26-C4T2U3: Provides enhanced performance characteristics compared to S-13R1G26-A4T2U3.
4. S-13R1G26-D4T2U3: Suitable for high-temperature environments with extended operating temperature range.

(Note: The above alternative models are fictional and provided for illustrative purposes only.)

This entry provides an overview of the S-13R1G26-A4T2U3, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.