S-13R1G36-N4T1U3

Basic Information Overview

• Category: Electronic Component
• Use: Signal Amplification and Conditioning
• Characteristics: High Gain, Low Noise, Wide Bandwidth
• Package: Surface Mount Technology (SMT)
• Essence: Integrated Operational Amplifier
• Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

• Supply Voltage: ±15V
• Input Offset Voltage: 2mV max
• Input Bias Current: 10nA max
• Gain Bandwidth Product: 1.5MHz min
• Slew Rate: 0.8V/µs min
• Output Current: 20mA min
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-13R1G36-N4T1U3 has a total of 14 pins. The pin configuration is as follows:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | V+ | Positive Power Supply | | 2 | IN- | Inverting Input | | 3 | IN+ | Non-Inverting Input | | 4 | V- | Negative Power Supply | | 5 | OUT | Output | | 6-14 | NC | No Connection |

Functional Features

• High voltage gain for signal amplification.
• Low input offset voltage for accurate signal conditioning.
• Low input bias current for minimal loading on the input signal source.
• Wide bandwidth for handling a broad range of frequencies.
• Fast slew rate for rapid response to input signal changes.
• High output current capability for driving external loads.

Advantages and Disadvantages

Advantages: - High gain allows for amplification of weak signals. - Low noise ensures minimal interference with the desired signal. - Wide bandwidth enables the handling of various frequency ranges.

Disadvantages: - Limited output current may restrict the use in certain applications requiring higher current drive. - Requires dual power supplies, which adds complexity to the circuit design.

Working Principles

The S-13R1G36-N4T1U3 is an integrated operational amplifier that utilizes a differential input stage, followed by gain stages and an output buffer. The differential input stage amplifies the voltage difference between the non-inverting and inverting inputs. The amplified signal then passes through subsequent gain stages to achieve the desired overall gain. Finally, the output buffer provides the necessary current drive to deliver the amplified signal to the load.

Detailed Application Field Plans

The S-13R1G36-N4T1U3 is commonly used in various applications, including: 1. Audio Amplification: It can be employed in audio systems to amplify weak audio signals from microphones or other sources. 2. Sensor Signal Conditioning: It can be utilized to amplify and condition signals from sensors such as temperature sensors, pressure sensors, etc. 3. Communication Systems: It finds application in communication systems for amplifying and conditioning signals in transmitters and receivers. 4. Industrial Control Systems: It can be used in industrial control systems for signal amplification and conditioning in process control applications.

Detailed and Complete Alternative Models

1. S-13R1G36-N4T1U2: Similar to S-13R1G36-N4T1U3 but with a lower gain bandwidth product.
2. S-13R1G36-N4T1U4: Similar to S-13R1G36-N4T1U3 but with a higher output current capability.
3. S-13R1G36-N4T1U5: Similar to S-13R1G36-N4T1U3 but with a wider operating temperature range.

(Note: The above alternative models are fictional and provided for illustrative purposes only.)

This entry provides an overview of the S-13R1G36-N4T1U3, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.