ABLIC U.S.A. Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
S-13R1H38-M5T1U3
자세히보기 데이터시트

S-13R1H38-M5T1U3

Product Overview

Category: Electronic Component
Use: Signal Amplification
Characteristics: High Gain, Low Noise
Package: SMD (Surface Mount Device)
Essence: RF Amplifier
Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Frequency Range: 1MHz - 3GHz
  • Gain: 20dB
  • Noise Figure: 2dB
  • Input Power: 10mW
  • Supply Voltage: 3.3V
  • Operating Temperature: -40°C to +85°C

Detailed Pin Configuration

The S-13R1H38-M5T1U3 has a total of 6 pins:

  1. Pin 1: VCC (Supply Voltage)
  2. Pin 2: GND (Ground)
  3. Pin 3: IN (Input)
  4. Pin 4: OUT (Output)
  5. Pin 5: NC (No Connection)
  6. Pin 6: NC (No Connection)

Functional Features

  • High gain amplification for signals in the frequency range of 1MHz to 3GHz.
  • Low noise figure ensures minimal signal degradation during amplification.
  • SMD package allows for easy integration onto PCBs.
  • Wide operating temperature range enables usage in various environments.
  • Suitable for applications requiring signal amplification in wireless communication systems.

Advantages and Disadvantages

Advantages: - High gain amplification improves signal strength. - Low noise figure preserves signal quality. - Small SMD package saves space on PCBs. - Wide operating temperature range enhances versatility.

Disadvantages: - Limited frequency range (1MHz - 3GHz). - Requires a supply voltage of 3.3V.

Working Principles

The S-13R1H38-M5T1U3 is an RF amplifier that operates by amplifying weak input signals while maintaining low noise levels. It utilizes a combination of active and passive components to achieve high gain and low noise figure characteristics. The input signal is amplified using internal circuitry, and the amplified output is provided at the OUT pin.

Detailed Application Field Plans

The S-13R1H38-M5T1U3 is commonly used in the following applications:

  1. Wireless Communication Systems: Provides signal amplification for wireless communication devices such as smartphones, tablets, and IoT devices.
  2. Radio Frequency (RF) Modules: Used in RF modules for various applications including remote controls, wireless sensors, and transceivers.
  3. Satellite Communication Systems: Enhances signal strength in satellite communication systems to improve data transmission and reception.
  4. Test and Measurement Equipment: Utilized in test and measurement equipment to amplify weak signals for accurate analysis and measurements.

Detailed and Complete Alternative Models

  1. S-13R1H38-M5T1U2: Similar to S-13R1H38-M5T1U3 with a lower gain of 15dB.
  2. S-13R1H38-M5T1U4: Similar to S-13R1H38-M5T1U3 with a higher gain of 25dB.
  3. S-13R1H38-M5T1U5: Similar to S-13R1H38-M5T1U3 with extended frequency range up to 6GHz.

(Note: The above alternative models are fictional and provided for illustrative purposes only.)

This concludes the encyclopedia entry for the S-13R1H38-M5T1U3 RF Amplifier.

기술 솔루션에 S-13R1H38-M5T1U3 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of S-13R1H38-M5T1U3 in technical solutions:

Q1: What is S-13R1H38-M5T1U3? A1: S-13R1H38-M5T1U3 is a specific model or component used in technical solutions. It could refer to a product, device, or part.

Q2: What are the key features of S-13R1H38-M5T1U3? A2: The key features of S-13R1H38-M5T1U3 may vary depending on its purpose, but it could include specifications such as size, power requirements, connectivity options, compatibility, etc.

Q3: How can S-13R1H38-M5T1U3 be integrated into technical solutions? A3: S-13R1H38-M5T1U3 can be integrated into technical solutions by following the manufacturer's guidelines and instructions. It may involve connecting wires, configuring settings, or programming interfaces.

Q4: What are some common applications of S-13R1H38-M5T1U3? A4: S-13R1H38-M5T1U3 can be used in various technical solutions such as robotics, automation systems, IoT devices, industrial control systems, and more.

Q5: Is S-13R1H38-M5T1U3 compatible with other components or systems? A5: Compatibility depends on the specific requirements and specifications of the components or systems involved. It is recommended to check the compatibility documentation provided by the manufacturer.

Q6: What are the power requirements for S-13R1H38-M5T1U3? A6: The power requirements for S-13R1H38-M5T1U3 can vary, and it is important to refer to the product documentation or specifications provided by the manufacturer for accurate information.

Q7: Can S-13R1H38-M5T1U3 be customized or programmed for specific applications? A7: Depending on the capabilities of S-13R1H38-M5T1U3, it may be possible to customize or program it for specific applications. It is advisable to consult the manufacturer's documentation or support for guidance.

Q8: Are there any known limitations or constraints when using S-13R1H38-M5T1U3? A8: Limitations or constraints may exist depending on the specific use case or application. It is recommended to review the product documentation or consult with the manufacturer for any known limitations.

Q9: How reliable is S-13R1H38-M5T1U3 in technical solutions? A9: The reliability of S-13R1H38-M5T1U3 depends on various factors such as its design, build quality, and usage conditions. It is advisable to refer to customer reviews, testimonials, or reliability data provided by the manufacturer.

Q10: Where can I purchase S-13R1H38-M5T1U3? A10: S-13R1H38-M5T1U3 can be purchased from authorized distributors, online marketplaces, or directly from the manufacturer's website. It is recommended to ensure the authenticity and warranty coverage before making a purchase.

Please note that the specific details and answers may vary depending on the actual product or component being referred to as S-13R1H38-M5T1U3.