이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
S-1701E3326-M5T1G

S-1701E3326-M5T1G

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Regulator
  • Characteristics: Low Dropout, High Accuracy, Low Quiescent Current
  • Package: SOT-23-5
  • Essence: Linear Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Dropout Voltage: 200mV at 150mA
  • Output Current: 150mA
  • Line Regulation: ±0.2% (typical)
  • Load Regulation: ±0.4% (typical)
  • Quiescent Current: 45µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1701E3326-M5T1G has a total of five pins arranged as follows: 1. GND (Ground) 2. VIN (Input Voltage) 3. VOUT (Output Voltage) 4. NC (No Connection) 5. EN (Enable)

Functional Features

  • Low dropout voltage ensures stable output even with small input-output voltage differentials.
  • High accuracy provides precise output voltage regulation.
  • Low quiescent current minimizes power consumption in standby mode.
  • Enable pin allows for easy on/off control of the regulator.

Advantages and Disadvantages

Advantages: - Wide input voltage range allows for flexibility in various applications. - Small package size enables space-saving designs. - Excellent line and load regulation ensure stable performance. - Low quiescent current extends battery life in portable devices.

Disadvantages: - Limited output current may not be suitable for high-power applications. - Dropout voltage may cause efficiency loss in low input voltage scenarios.

Working Principles

The S-1701E3326-M5T1G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage and adjusting the pass transistor accordingly. This feedback mechanism ensures a stable output voltage despite variations in input voltage and load conditions.

Detailed Application Field Plans

The S-1701E3326-M5T1G is commonly used in various electronic devices, including: 1. Mobile phones 2. Portable media players 3. Digital cameras 4. Wireless communication modules 5. Battery-powered devices

Detailed and Complete Alternative Models

  1. S-1701E3326-M5T1U: Same specifications and features, but available in a different package (SOT-89-5).
  2. S-1701E3326-M5T2G: Similar specifications and features, but with an extended temperature range (-40°C to +125°C).

Note: These alternative models provide similar functionality and can be used as substitutes based on specific design requirements.

This entry provides comprehensive information about the S-1701E3326-M5T1G voltage regulator. Its basic information, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models are covered.

기술 솔루션에 S-1701E3326-M5T1G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of S-1701E3326-M5T1G in technical solutions:

Q1: What is S-1701E3326-M5T1G? A1: S-1701E3326-M5T1G is a specific model of voltage regulator IC (integrated circuit) used for regulating voltage levels in electronic circuits.

Q2: What is the input voltage range of S-1701E3326-M5T1G? A2: The input voltage range of S-1701E3326-M5T1G is typically between 2.5V and 6.0V.

Q3: What is the output voltage range of S-1701E3326-M5T1G? A3: The output voltage range of S-1701E3326-M5T1G can be adjusted from 0.8V to 5.5V using external resistors.

Q4: What is the maximum output current of S-1701E3326-M5T1G? A4: The maximum output current of S-1701E3326-M5T1G is typically around 150mA.

Q5: What are the typical applications of S-1701E3326-M5T1G? A5: S-1701E3326-M5T1G is commonly used in various technical solutions such as battery-powered devices, portable electronics, IoT (Internet of Things) devices, and low-power embedded systems.

Q6: Does S-1701E3326-M5T1G have built-in protection features? A6: Yes, S-1701E3326-M5T1G includes built-in protection features like overcurrent protection, thermal shutdown, and reverse current protection.

Q7: Can S-1701E3326-M5T1G operate in a wide temperature range? A7: Yes, S-1701E3326-M5T1G is designed to operate in a wide temperature range, typically from -40°C to +85°C.

Q8: Is S-1701E3326-M5T1G available in different package types? A8: Yes, S-1701E3326-M5T1G is available in various package types such as SOT-23-5, SOT-89-5, and SC-82AB.

Q9: Can S-1701E3326-M5T1G be used in automotive applications? A9: Yes, S-1701E3326-M5T1G is suitable for automotive applications as it meets the necessary standards and requirements.

Q10: Are there any evaluation boards or reference designs available for S-1701E3326-M5T1G? A10: Yes, some manufacturers provide evaluation boards and reference designs to help users quickly prototype and integrate S-1701E3326-M5T1G into their technical solutions.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of S-1701E3326-M5T1G.