S-1711A2828-M6T1G
Basic Information Overview
- Category: Electronic Component
- Use: Voltage Regulator
- Characteristics: High Efficiency, Low Dropout Voltage
- Package: SOT-23
- Essence: Linear Regulator
- Packaging/Quantity: Tape and Reel, 3000 pieces per reel
Specifications
- Input Voltage Range: 2.5V to 6.5V
- Output Voltage Range: 1.2V to 5.5V
- Maximum Output Current: 150mA
- Dropout Voltage: 200mV at 100mA
- Line Regulation: ±0.3% typical
- Load Regulation: ±0.3% typical
- Quiescent Current: 50µA typical
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-1711A2828-M6T1G has three pins: 1. VIN (Pin 1): Input voltage pin 2. GND (Pin 2): Ground pin 3. VOUT (Pin 3): Output voltage pin
Functional Features
- Low dropout voltage enables efficient power conversion.
- Excellent line and load regulation ensures stable output voltage.
- Low quiescent current minimizes power consumption.
- Thermal shutdown protection prevents overheating.
Advantages and Disadvantages
Advantages: - High efficiency - Low dropout voltage - Stable output voltage - Compact SOT-23 package
Disadvantages: - Limited maximum output current (150mA) - Narrow input voltage range (2.5V to 6.5V)
Working Principles
The S-1711A2828-M6T1G is a linear regulator that regulates the output voltage based on the difference between the input and desired output voltage. It uses a pass transistor to control the voltage drop across it, ensuring a stable output voltage. The low dropout voltage allows efficient power conversion even when the input voltage is close to the desired output voltage.
Detailed Application Field Plans
The S-1711A2828-M6T1G is commonly used in various electronic devices that require a stable and regulated power supply. Some application fields include: - Battery-powered devices - Portable consumer electronics - IoT devices - Medical equipment - Industrial automation
Detailed and Complete Alternative Models
- S-1711A2818-M6T1G: Similar specifications, but with a lower maximum output current of 100mA.
- S-1711A2833-M6T1G: Similar specifications, but with a higher maximum output current of 300mA.
- S-1711A2805-M6T1G: Similar specifications, but with a wider input voltage range of 2.0V to 7.0V.
Note: These alternative models are provided as examples and may not cover all available options.
This entry provides an overview of the S-1711A2828-M6T1G voltage regulator. It includes basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.
기술 솔루션에 S-1711A2828-M6T1G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of S-1711A2828-M6T1G in technical solutions:
Q1: What is S-1711A2828-M6T1G? A1: S-1711A2828-M6T1G is a specific model or part number of a component used in technical solutions, such as electronic circuits or systems.
Q2: What is the purpose of S-1711A2828-M6T1G? A2: The purpose of S-1711A2828-M6T1G is to serve a specific function within a technical solution, such as voltage regulation, signal amplification, or power management.
Q3: How does S-1711A2828-M6T1G work? A3: S-1711A2828-M6T1G works by receiving input signals or power and processing them according to its design specifications, providing the desired output signals or power.
Q4: What are the key features of S-1711A2828-M6T1G? A4: The key features of S-1711A2828-M6T1G may include its voltage range, current capacity, frequency response, temperature range, package type, and other relevant specifications.
Q5: Can S-1711A2828-M6T1G be used in different technical solutions? A5: Yes, S-1711A2828-M6T1G can be used in various technical solutions as long as its specifications match the requirements of the particular application.
Q6: Are there any limitations or considerations when using S-1711A2828-M6T1G? A6: Yes, it is important to consider factors such as operating conditions, compatibility with other components, thermal management, and any specific application requirements when using S-1711A2828-M6T1G.
Q7: Where can I find the datasheet or technical documentation for S-1711A2828-M6T1G? A7: The datasheet or technical documentation for S-1711A2828-M6T1G can usually be found on the manufacturer's website or by contacting the manufacturer directly.
Q8: Can S-1711A2828-M6T1G be replaced with a different component? A8: It depends on the specific requirements of the technical solution. In some cases, S-1711A2828-M6T1G may have unique features or specifications that make it difficult to replace with an alternative component.
Q9: How do I integrate S-1711A2828-M6T1G into my technical solution? A9: Integrating S-1711A2828-M6T1G into your technical solution involves understanding its pin configuration, electrical connections, and any additional circuitry or components required for proper operation.
Q10: Are there any recommended design practices or guidelines when using S-1711A2828-M6T1G? A10: Yes, it is advisable to follow the manufacturer's recommendations, application notes, and best practices for circuit layout, decoupling capacitors, thermal considerations, and other relevant design aspects when using S-1711A2828-M6T1G.
Please note that the specific questions and answers may vary depending on the context and requirements of the technical solution.