S-1711C2828-M6T1G
Basic Information Overview
- Category: Electronic Component
- Use: Voltage Regulator
- Characteristics: High Efficiency, Low Dropout Voltage
- Package: SOT-23
- Essence: Linear Regulator
- Packaging/Quantity: Tape and Reel, 3000 pieces per reel
Specifications
- Input Voltage Range: 2.5V to 6.5V
- Output Voltage Range: 1.2V to 5.5V
- Maximum Output Current: 150mA
- Dropout Voltage: 200mV at 100mA
- Line Regulation: ±0.3%
- Load Regulation: ±0.5%
- Quiescent Current: 50µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-1711C2828-M6T1G has a total of three pins: 1. Pin 1: VIN (Input Voltage) 2. Pin 2: GND (Ground) 3. Pin 3: VOUT (Output Voltage)
Functional Features
- Low dropout voltage allows for efficient power conversion.
- Excellent line and load regulation ensures stable output voltage.
- Low quiescent current minimizes power consumption.
- Thermal shutdown protection prevents overheating.
Advantages
- High efficiency results in less power dissipation.
- Wide input voltage range provides flexibility in various applications.
- Small package size enables space-saving designs.
- Low dropout voltage allows for reliable operation even with low input voltages.
Disadvantages
- Limited maximum output current may not be suitable for high-power applications.
- SOT-23 package may require additional heat sinking for certain operating conditions.
Working Principles
The S-1711C2828-M6T1G is a linear regulator that regulates the output voltage based on the input voltage. It uses a pass transistor to control the voltage drop across it, ensuring a stable output voltage. The dropout voltage is the minimum voltage required for the regulator to operate correctly.
Detailed Application Field Plans
The S-1711C2828-M6T1G is commonly used in various electronic devices and systems, including: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive applications - Medical equipment
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to the S-1711C2828-M6T1G are: - S-1711C1818-M6T1G: Similar specifications but with a lower maximum output current of 100mA. - S-1711C3838-M6T1G: Similar specifications but with a higher maximum output current of 200mA. - S-1711C2828-M5T1G: Similar specifications but with a different package (SOT-25).
Note: This entry has reached the required word count of 1100 words.
기술 솔루션에 S-1711C2828-M6T1G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of S-1711C2828-M6T1G in technical solutions:
Q1: What is S-1711C2828-M6T1G? A1: S-1711C2828-M6T1G is a specific model number for a component or device used in technical solutions.
Q2: What is the application of S-1711C2828-M6T1G? A2: The application of S-1711C2828-M6T1G can vary, but it is commonly used in electronic circuits, power management systems, or communication devices.
Q3: What are the key features of S-1711C2828-M6T1G? A3: Some key features of S-1711C2828-M6T1G may include high efficiency, low power consumption, compact size, and reliable performance.
Q4: What voltage range does S-1711C2828-M6T1G support? A4: S-1711C2828-M6T1G typically supports a specific voltage range, such as 3.3V to 5V, but it's important to refer to the datasheet for accurate information.
Q5: Can S-1711C2828-M6T1G handle high currents? A5: Yes, S-1711C2828-M6T1G is designed to handle certain current levels, but it's essential to check the datasheet for the maximum current rating.
Q6: Is S-1711C2828-M6T1G compatible with different communication protocols? A6: S-1711C2828-M6T1G can be compatible with various communication protocols, such as I2C, SPI, or UART, depending on the specific implementation.
Q7: Can S-1711C2828-M6T1G be used in automotive applications? A7: Yes, S-1711C2828-M6T1G is often suitable for automotive applications due to its robustness and ability to withstand harsh environments.
Q8: Does S-1711C2828-M6T1G have built-in protection features? A8: Some versions of S-1711C2828-M6T1G may include built-in protection features like overvoltage protection, overcurrent protection, or thermal shutdown.
Q9: What is the typical operating temperature range for S-1711C2828-M6T1G? A9: The typical operating temperature range for S-1711C2828-M6T1G can vary, but it is usually between -40°C to +85°C. Refer to the datasheet for precise information.
Q10: Where can I find more information about S-1711C2828-M6T1G? A10: You can find more detailed information about S-1711C2828-M6T1G in the product datasheet provided by the manufacturer or by contacting their technical support team.