S-812C37BMC-C4RT2G
Product Overview
Category
The S-812C37BMC-C4RT2G belongs to the category of voltage regulators.
Use
This product is primarily used for regulating voltage in electronic circuits.
Characteristics
- High precision voltage regulation
- Low dropout voltage
- Low quiescent current
- Thermal shutdown protection
- Short-circuit protection
Package
The S-812C37BMC-C4RT2G comes in a small surface-mount package.
Essence
The essence of this product lies in its ability to provide stable and regulated voltage output, ensuring proper functioning of electronic devices.
Packaging/Quantity
The S-812C37BMC-C4RT2G is typically packaged in reels and is available in quantities of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 3.7V
- Output Current: 100mA
- Dropout Voltage: 160mV (typical)
- Quiescent Current: 30μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-812C37BMC-C4RT2G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- CE: Chip enable pin
Functional Features
- High Precision Regulation: The S-812C37BMC-C4RT2G provides precise voltage regulation, ensuring stable output even under varying load conditions.
- Low Dropout Voltage: With a low dropout voltage of only 160mV, this regulator can maintain a stable output even when the input voltage is close to the desired output voltage.
- Low Quiescent Current: The low quiescent current of 30μA ensures minimal power consumption when the device is in standby or idle mode.
- Thermal Shutdown Protection: The regulator has built-in thermal shutdown protection, which prevents damage due to excessive heat.
- Short-Circuit Protection: The S-812C37BMC-C4RT2G is equipped with short-circuit protection, safeguarding the circuit from potential damage.
Advantages and Disadvantages
Advantages
- High precision voltage regulation ensures stable output.
- Low dropout voltage allows for efficient operation even with low input voltages.
- Low quiescent current minimizes power consumption.
- Thermal shutdown protection prevents overheating.
- Short-circuit protection safeguards the circuit.
Disadvantages
- Limited output current capacity (100mA).
- Restricted input voltage range (2.5V - 6.0V).
Working Principles
The S-812C37BMC-C4RT2G operates based on a voltage regulation principle known as a linear regulator. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a constant output voltage despite variations in the input voltage or load conditions. This is achieved by controlling the flow of current through a series pass transistor.
Detailed Application Field Plans
The S-812C37BMC-C4RT2G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Medical equipment - Automotive electronics
Detailed and Complete Alternative Models
- S-812C33BMC-C4RT2G: Similar to S-812C37BMC-C4RT2G, but with an output voltage of 3.3V.
- S-812C50BMC-C4RT2G: Similar to S-812C37BMC-C4RT2G, but with an output voltage of 5.0V.
- S-812C25BMC-C4RT2G: Similar to S-812C37BMC-C4RT2G, but with an output voltage of 2.5V.
These alternative models offer similar characteristics and functionality, but with different output voltage options to suit specific application requirements.
Word count: 511 words
기술 솔루션에 S-812C37BMC-C4RT2G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of S-812C37BMC-C4RT2G in technical solutions:
Q: What is the S-812C37BMC-C4RT2G? A: The S-812C37BMC-C4RT2G is a voltage regulator IC (integrated circuit) that provides a stable output voltage for various electronic devices.
Q: What is the input voltage range of S-812C37BMC-C4RT2G? A: The input voltage range of S-812C37BMC-C4RT2G is typically between 2.5V and 16V.
Q: What is the output voltage of S-812C37BMC-C4RT2G? A: The output voltage of S-812C37BMC-C4RT2G is fixed at 3.7V.
Q: What is the maximum output current of S-812C37BMC-C4RT2G? A: The maximum output current of S-812C37BMC-C4RT2G is typically 150mA.
Q: Can S-812C37BMC-C4RT2G be used in battery-powered applications? A: Yes, S-812C37BMC-C4RT2G can be used in battery-powered applications as it has low quiescent current and operates efficiently with low input voltages.
Q: Is S-812C37BMC-C4RT2G suitable for automotive applications? A: Yes, S-812C37BMC-C4RT2G is designed to meet the requirements of automotive applications, including high reliability and wide temperature range.
Q: Does S-812C37BMC-C4RT2G have built-in protection features? A: Yes, S-812C37BMC-C4RT2G includes various protection features such as overcurrent protection, thermal shutdown, and short-circuit protection.
Q: Can S-812C37BMC-C4RT2G be used in space-constrained designs? A: Yes, S-812C37BMC-C4RT2G is available in a small package (SOT-23-5), making it suitable for space-constrained designs.
Q: What are the typical applications of S-812C37BMC-C4RT2G? A: S-812C37BMC-C4RT2G can be used in a wide range of applications, including portable devices, IoT (Internet of Things) devices, automotive electronics, and more.
Q: Where can I find more information about S-812C37BMC-C4RT2G? A: You can refer to the datasheet or contact the manufacturer for more detailed information about S-812C37BMC-C4RT2G, including its specifications, application notes, and technical support.