S-812C60AY-B2-U
Product Overview
Category
The S-812C60AY-B2-U belongs to the category of voltage regulators.
Use
This product is primarily used for regulating voltage in electronic circuits.
Characteristics
- High precision voltage regulation
- Low dropout voltage
- Low quiescent current
- Thermal shutdown protection
- Short circuit protection
Package
The S-812C60AY-B2-U comes in a compact surface-mount package.
Essence
The essence of this product lies in its ability to provide stable and regulated voltage to electronic devices.
Packaging/Quantity
The S-812C60AY-B2-U is typically packaged in reels and is available in quantities of 1000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 3.3V
- Output Current: 150mA
- Dropout Voltage: 160mV (typical)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-812C60AY-B2-U has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
Functional Features
- High precision voltage regulation ensures stable output voltage.
- Low dropout voltage allows efficient operation even with low input voltages.
- Low quiescent current minimizes power consumption when the device is idle.
- Thermal shutdown protection prevents damage due to excessive heat.
- Short circuit protection safeguards the device and connected components from damage in case of a short circuit.
Advantages and Disadvantages
Advantages
- Provides stable and regulated voltage for electronic circuits.
- Compact surface-mount package allows for easy integration into various applications.
- Low dropout voltage enables efficient operation in low voltage conditions.
- Thermal shutdown and short circuit protection enhance the reliability of the device.
Disadvantages
- Limited output current may not be suitable for high-power applications.
- Input voltage range is restricted to 2.5V - 6.0V, limiting compatibility with certain systems.
Working Principles
The S-812C60AY-B2-U operates based on a voltage regulation principle known as a linear regulator. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a stable output voltage despite changes in input voltage or load conditions.
Detailed Application Field Plans
The S-812C60AY-B2-U finds application in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Medical equipment
Detailed and Complete Alternative Models
S-812C33AMC-C2-TF
- Output Voltage: 3.3V
- Output Current: 150mA
- Dropout Voltage: 160mV (typical)
- Quiescent Current: 30µA (typical)
S-812C50AY-B2-U
- Output Voltage: 5.0V
- Output Current: 150mA
- Dropout Voltage: 160mV (typical)
- Quiescent Current: 30µA (typical)
S-812C12AY-B2-U
- Output Voltage: 1.2V
- Output Current: 150mA
- Dropout Voltage: 160mV (typical)
- Quiescent Current: 30µA (typical)
S-812C25AY-B2-U
- Output Voltage: 2.5V
- Output Current: 150mA
- Dropout Voltage: 160mV (typical)
- Quiescent Current: 30µA (typical)
These alternative models offer similar specifications and functionality to the S-812C60AY-B2-U, but with different output voltages.
In conclusion, the S-812C60AY-B2-U is a voltage regulator that provides stable and regulated voltage for electronic circuits. Its compact size, low dropout voltage, and various protection features make it suitable for a wide range of applications in different industries.
기술 솔루션에 S-812C60AY-B2-U 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of S-812C60AY-B2-U in technical solutions:
1. What is the S-812C60AY-B2-U? - The S-812C60AY-B2-U is a voltage regulator IC (integrated circuit) that provides a stable output voltage for various electronic devices.
2. What is the input voltage range of S-812C60AY-B2-U? - The input voltage range of S-812C60AY-B2-U is typically between 2.5V and 16V.
3. What is the output voltage of S-812C60AY-B2-U? - The output voltage of S-812C60AY-B2-U is fixed at 6.0V.
4. What is the maximum output current of S-812C60AY-B2-U? - The maximum output current of S-812C60AY-B2-U is 150mA.
5. Can S-812C60AY-B2-U be used in battery-powered applications? - Yes, S-812C60AY-B2-U can be used in battery-powered applications as it has a low quiescent current and operates efficiently with low input voltages.
6. Is S-812C60AY-B2-U suitable for automotive applications? - Yes, S-812C60AY-B2-U is suitable for automotive applications as it meets the AEC-Q100 automotive reliability standards.
7. Does S-812C60AY-B2-U have built-in protection features? - Yes, S-812C60AY-B2-U has built-in protection features such as overcurrent protection, thermal shutdown, and short-circuit protection.
8. Can S-812C60AY-B2-U be used in industrial control systems? - Yes, S-812C60AY-B2-U can be used in industrial control systems as it operates reliably in a wide temperature range (-40°C to +105°C) and has stable output characteristics.
9. What is the package type of S-812C60AY-B2-U? - S-812C60AY-B2-U is available in a small SOT-89 package, which is compact and suitable for space-constrained applications.
10. Are there any application notes or reference designs available for S-812C60AY-B2-U? - Yes, the manufacturer provides application notes and reference designs that can help in implementing S-812C60AY-B2-U in various technical solutions. These resources can be found on the manufacturer's website or obtained from their technical support team.
Please note that the answers provided here are general and may vary depending on specific requirements and use cases. It is always recommended to refer to the datasheet and consult with the manufacturer or technical experts for accurate and detailed information.