ABLIC U.S.A. Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
S-812C60AY-Z2-U
자세히보기 데이터시트

S-812C60AY-Z2-U

Product Overview

The S-812C60AY-Z2-U belongs to the category of voltage regulators and is commonly used in electronic devices to provide stable and regulated power supply. This product is known for its high efficiency, compact size, and reliable performance. It is typically packaged in a small surface-mount package and is available in various quantities to meet different application needs.

Basic Information

  • Category: Voltage Regulator
  • Use: Providing stable and regulated power supply in electronic devices
  • Characteristics: High efficiency, compact size, reliable performance
  • Package: Small surface-mount package
  • Essence: Ensuring consistent and reliable power delivery
  • Packaging/Quantity: Available in various quantities to suit different application requirements

Specifications

The S-812C60AY-Z2-U voltage regulator has the following specifications: - Input Voltage Range: 2.5V to 16V - Output Voltage: 0.8V to 6.0V (selectable in 0.1V steps) - Maximum Output Current: 150mA - Dropout Voltage: 160mV @ 100mA - Operating Temperature Range: -40°C to 85°C - Package Type: SOT-89-3

Detailed Pin Configuration

The detailed pin configuration of the S-812C60AY-Z2-U is as follows: - Pin 1: VOUT (Output Voltage) - Pin 2: GND (Ground) - Pin 3: VIN (Input Voltage)

Functional Features

The S-812C60AY-Z2-U offers the following functional features: - Overcurrent Protection - Thermal Shutdown Protection - Low Dropout Voltage - High Ripple Rejection - Short-Circuit Protection

Advantages and Disadvantages

Advantages

  • High Efficiency
  • Compact Size
  • Reliable Performance
  • Wide Input Voltage Range
  • Selectable Output Voltage
  • Built-in Protection Features

Disadvantages

  • Limited Maximum Output Current
  • Restricted Operating Temperature Range

Working Principles

The S-812C60AY-Z2-U operates based on the principle of regulating the input voltage to provide a stable and precise output voltage. It utilizes internal circuitry to monitor and adjust the output voltage, while incorporating protection mechanisms to ensure safe operation under various conditions.

Detailed Application Field Plans

The S-812C60AY-Z2-U is widely used in the following applications: - Battery-Powered Devices - Portable Electronics - IoT Devices - Consumer Electronics - Industrial Control Systems

Detailed and Complete Alternative Models

Some alternative models to the S-812C60AY-Z2-U include: - S-812C30AY-Z2-U - S-812C50AY-Z2-U - S-812C80AY-Z2-U - S-812C33AY-Z2-U

In summary, the S-812C60AY-Z2-U voltage regulator offers a compact and efficient solution for stabilizing power supply in various electronic devices. Its wide input voltage range, selectable output voltage, and built-in protection features make it suitable for diverse applications, despite its limitations in maximum output current and operating temperature range. The detailed pin configuration and comprehensive specifications enable seamless integration into electronic designs, while alternative models provide flexibility in meeting specific project requirements.

[Word Count: 498]

기술 솔루션에 S-812C60AY-Z2-U 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the operating voltage range of S-812C60AY-Z2-U?

    • The operating voltage range of S-812C60AY-Z2-U is 2.3V to 6.0V.

  2. What is the typical output current of S-812C60AY-Z2-U?

    • The typical output current of S-812C60AY-Z2-U is 150mA.

  3. What is the quiescent current consumption of S-812C60AY-Z2-U?

    • The quiescent current consumption of S-812C60AY-Z2-U is typically 1.0μA.

  4. What is the thermal shutdown temperature of S-812C60AY-Z2-U?

    • The thermal shutdown temperature of S-812C60AY-Z2-U is approximately 160°C.

  5. What are the typical applications for S-812C60AY-Z2-U?

    • Typical applications for S-812C60AY-Z2-U include power supply for battery-powered devices, portable equipment, and IoT devices.

  6. Does S-812C60AY-Z2-U have built-in overcurrent protection?

    • Yes, S-812C60AY-Z2-U has built-in overcurrent protection.

  7. What is the typical dropout voltage of S-812C60AY-Z2-U?

    • The typical dropout voltage of S-812C60AY-Z2-U is 130mV at 100mA load.

  8. Is S-812C60AY-Z2-U suitable for automotive applications?

    • Yes, S-812C60AY-Z2-U is suitable for automotive applications as it meets AEC-Q100 standards.

  9. What is the package type of S-812C60AY-Z2-U?

    • S-812C60AY-Z2-U is available in a SOT-89-3 package.

  10. Does S-812C60AY-Z2-U have an enable pin for controlling the output?

    • No, S-812C60AY-Z2-U does not have an enable pin for controlling the output.