S-817A45APF-CVITFG
Product Overview
Category
S-817A45APF-CVITFG belongs to the category of voltage regulators.
Use
This product is primarily used for regulating voltage in electronic circuits.
Characteristics
- Voltage regulation capability
- Low power consumption
- Compact size
- Wide input voltage range
- High accuracy
- Overcurrent protection
Package
The S-817A45APF-CVITFG comes in a small surface-mount package, making it suitable for space-constrained applications.
Essence
The essence of this product lies in its ability to provide stable and regulated voltage output, ensuring proper functioning of electronic devices.
Packaging/Quantity
The S-817A45APF-CVITFG is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 4.5V
- Output Current: Up to 50mA
- Dropout Voltage: 150mV (typical)
- Quiescent Current: 1μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-817A45APF-CVITFG has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
Functional Features
- Voltage Regulation: The S-817A45APF-CVITFG ensures a stable output voltage regardless of input voltage fluctuations.
- Low Power Consumption: With a quiescent current of only 1μA, this regulator minimizes power wastage.
- Overcurrent Protection: The device incorporates overcurrent protection to safeguard against excessive current flow.
Advantages and Disadvantages
Advantages
- Wide input voltage range allows for flexibility in various applications.
- Compact size enables integration into space-constrained designs.
- High accuracy ensures precise voltage regulation.
- Low power consumption contributes to energy efficiency.
Disadvantages
- Limited output current capacity may restrict usage in high-power applications.
- Dropout voltage of 150mV may cause a slight voltage drop across the regulator.
Working Principles
The S-817A45APF-CVITFG operates based on the principle of a linear voltage regulator. It utilizes a feedback mechanism to maintain a constant output voltage, compensating for changes in the input voltage. By adjusting the resistance within the device, it regulates the voltage difference between the input and output terminals, ensuring a stable output voltage.
Detailed Application Field Plans
The S-817A45APF-CVITFG finds application in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Medical equipment
Detailed and Complete Alternative Models
- S-817A33APF-CVITFG: Output Voltage - 3.3V, Output Current - Up to 50mA
- S-817A50APF-CVITFG: Output Voltage - 5.0V, Output Current - Up to 50mA
- S-817A18APF-CVITFG: Output Voltage - 1.8V, Output Current - Up to 50mA
- S-817A12APF-CVITFG: Output Voltage - 1.2V, Output Current - Up to 50mA
These alternative models offer different output voltages while sharing similar characteristics and features with the S-817A45APF-CVITFG.
In conclusion, the S-817A45APF-CVITFG is a voltage regulator that provides stable and regulated voltage output. Its compact size, low power consumption, and wide input voltage range make it suitable for various applications. However, its limited output current capacity and dropout voltage should be considered when selecting the appropriate model for specific requirements.
기술 솔루션에 S-817A45APF-CVITFG 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
1. What is the S-817A45APF-CVITFG?
The S-817A45APF-CVITFG is a voltage detector IC (integrated circuit) manufactured by a specific company. It is commonly used in technical solutions to monitor and detect voltage levels.
2. What is the purpose of using the S-817A45APF-CVITFG in technical solutions?
The purpose of using the S-817A45APF-CVITFG is to ensure that the voltage levels in a system or circuit remain within a specified range. It provides a reliable way to monitor and detect voltage variations, which can be crucial for the proper functioning of various electronic devices.
3. How does the S-817A45APF-CVITFG work?
The S-817A45APF-CVITFG works by comparing the input voltage with a reference voltage. If the input voltage exceeds or falls below the specified threshold, the IC triggers an output signal, indicating the voltage level has crossed the set limit.
4. What is the voltage range that the S-817A45APF-CVITFG can detect?
The S-817A45APF-CVITFG can detect voltage levels within a specific range, typically from 2.0V to 6.0V. However, it is essential to refer to the datasheet or product specifications for accurate information regarding the voltage range.
5. Can the S-817A45APF-CVITFG be used in both AC and DC applications?
No, the S-817A45APF-CVITFG is designed specifically for DC (direct current) applications. It is not suitable for use in AC (alternating current) circuits.
6. What are some typical applications of the S-817A45APF-CVITFG?
Some typical applications of the S-817A45APF-CVITFG include battery-powered devices, power management systems, voltage monitoring in electronic circuits, and various other technical solutions where accurate voltage detection is required.
7. Is the S-817A45APF-CVITFG programmable or adjustable?
No, the S-817A45APF-CVITFG is not programmable or adjustable. It has a fixed threshold voltage set by the manufacturer, which cannot be changed by the user.
8. What is the output type of the S-817A45APF-CVITFG?
The S-817A45APF-CVITFG provides an open-drain output type. This means that when the voltage exceeds the threshold, the output transistor pulls the output pin to ground (low), and when the voltage is below the threshold, the output pin is in a high-impedance state.
9. Can the S-817A45APF-CVITFG be used in automotive applications?
Yes, the S-817A45APF-CVITFG is suitable for use in automotive applications. It can monitor voltage levels in automotive systems and provide necessary alerts or triggers based on the voltage thresholds.
10. Are there any precautions to consider when using the S-817A45APF-CVITFG?
Yes, some precautions to consider when using the S-817A45APF-CVITFG include ensuring proper voltage supply, avoiding excessive voltage spikes, adhering to the specified operating temperature range, and following the recommended circuit layout guidelines provided in the datasheet.