S-817B40AUA-CXDT2U
Product Overview
Category
S-817B40AUA-CXDT2U belongs to the category of voltage regulators.
Use
This product is commonly used for voltage regulation in electronic circuits.
Characteristics
- Voltage regulation capability
- Low power consumption
- Compact size
- High reliability
Package
The S-817B40AUA-CXDT2U comes in a small surface-mount package.
Essence
The essence of this product lies in its ability to regulate voltage levels efficiently and reliably.
Packaging/Quantity
The S-817B40AUA-CXDT2U is typically packaged in reels and is available in quantities of 1000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 4.0V
- Output Current: 50mA
- Dropout Voltage: 160mV (typical)
- Quiescent Current: 1.0µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-817B40AUA-CXDT2U has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
Functional Features
- Voltage regulation: The S-817B40AUA-CXDT2U ensures a stable output voltage of 4.0V regardless of input voltage fluctuations.
- Low power consumption: With a quiescent current of only 1.0µA, this voltage regulator minimizes power wastage.
- Dropout voltage: The low dropout voltage of 160mV enables efficient operation even with low input voltages.
- Thermal shutdown protection: The device includes built-in thermal shutdown protection to prevent damage due to excessive heat.
Advantages and Disadvantages
Advantages
- Efficient voltage regulation
- Low power consumption
- Compact size
- High reliability
Disadvantages
- Limited output current (50mA)
- Restricted input voltage range (2.5V - 6.0V)
Working Principles
The S-817B40AUA-CXDT2U utilizes a combination of internal circuitry and feedback mechanisms to maintain a stable output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry accordingly to regulate the output voltage at the desired level.
Detailed Application Field Plans
The S-817B40AUA-CXDT2U finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Medical equipment - Industrial control systems
Detailed and Complete Alternative Models
S-817A33AUA-CWCT2G
- Input Voltage Range: 2.0V - 6.0V
- Output Voltage: 3.3V
- Output Current: 50mA
- Dropout Voltage: 160mV (typical)
- Quiescent Current: 1.0µA (typical)
- Operating Temperature Range: -40°C to +85°C
S-817B25AUA-CXCT2G
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 2.5V
- Output Current: 50mA
- Dropout Voltage: 160mV (typical)
- Quiescent Current: 1.0µA (typical)
- Operating Temperature Range: -40°C to +85°C
S-817B33AUA-CXCT2G
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 3.3V
- Output Current: 50mA
- Dropout Voltage: 160mV (typical)
- Quiescent Current: 1.0µA (typical)
- Operating Temperature Range: -40°C to +85°C
S-817B50AUA-CXCT2G
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 5.0V
- Output Current: 50mA
- Dropout Voltage: 160mV (typical)
- Quiescent Current: 1.0µA (typical)
- Operating Temperature Range: -40°C to +85°C
These alternative models offer similar functionality and characteristics, providing options for different voltage requirements.
*Note: The above specifications are subject to change. Please refer to the manufacturer's datasheet for the
기술 솔루션에 S-817B40AUA-CXDT2U 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of S-817B40AUA-CXDT2U in technical solutions:
Q: What is the S-817B40AUA-CXDT2U? A: The S-817B40AUA-CXDT2U is a voltage detector IC manufactured by a specific company (please specify the manufacturer if known).
Q: What is the purpose of the S-817B40AUA-CXDT2U? A: The purpose of this IC is to monitor and detect the voltage level in a circuit and provide an output signal when the voltage reaches a certain threshold.
Q: How does the S-817B40AUA-CXDT2U work? A: The IC compares the input voltage with a reference voltage internally set within the device. When the input voltage exceeds or falls below the reference voltage, it triggers the output signal accordingly.
Q: What is the voltage range that the S-817B40AUA-CXDT2U can detect? A: The S-817B40AUA-CXDT2U can detect voltages in the range of [specify voltage range].
Q: Can the S-817B40AUA-CXDT2U be used in both AC and DC circuits? A: No, the S-817B40AUA-CXDT2U is designed for use in DC circuits only.
Q: What is the output type of the S-817B40AUA-CXDT2U? A: The S-817B40AUA-CXDT2U provides an open-drain output, which means it can sink current but cannot source current.
Q: What is the typical accuracy of the voltage detection in the S-817B40AUA-CXDT2U? A: The typical accuracy of the voltage detection is [specify accuracy, e.g., ±1%].
Q: Can the threshold voltage be adjusted in the S-817B40AUA-CXDT2U? A: No, the threshold voltage is fixed and cannot be adjusted externally.
Q: What is the operating temperature range of the S-817B40AUA-CXDT2U? A: The S-817B40AUA-CXDT2U can operate within the temperature range of [specify temperature range].
Q: Are there any specific application notes or reference designs available for the S-817B40AUA-CXDT2U? A: Yes, the manufacturer provides application notes and reference designs that can help in implementing the IC in various technical solutions. These resources can be found on their official website or by contacting their technical support team.
Please note that the answers provided above are generic and may vary depending on the specific datasheet and manufacturer's documentation for the S-817B40AUA-CXDT2U.