ABLIC U.S.A. Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
S-817B48AY-Z2-U
자세히보기 데이터시트

S-817B48AY-Z2-U

Product Overview

Category

S-817B48AY-Z2-U belongs to the category of voltage regulators.

Use

This product is primarily used for voltage regulation in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Low power consumption
  • Compact size
  • High reliability

Package

The S-817B48AY-Z2-U comes in a small surface-mount package, making it suitable for space-constrained applications.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage output to ensure proper functioning of electronic devices.

Packaging/Quantity

The S-817B48AY-Z2-U is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 4.5V - 45V
  • Output Voltage: 4.8V
  • Output Current: 50mA
  • Dropout Voltage: 160mV (typical)
  • Quiescent Current: 1µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-817B48AY-Z2-U has three pins:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection
  • Low quiescent current

Advantages

  • Wide input voltage range
  • Low dropout voltage
  • High accuracy
  • Small form factor
  • Excellent temperature stability

Disadvantages

  • Limited output current capacity
  • Not suitable for high-power applications

Working Principles

The S-817B48AY-Z2-U operates based on a linear voltage regulator principle. It takes an input voltage within the specified range and regulates it to a stable 4.8V output voltage. The internal circuitry ensures that the output voltage remains constant even when the input voltage or load conditions vary.

Detailed Application Field Plans

The S-817B48AY-Z2-U is commonly used in various electronic devices, including:

  1. Battery-powered devices
  2. Portable consumer electronics
  3. Industrial control systems
  4. Automotive applications
  5. Communication equipment

Detailed and Complete Alternative Models

  1. S-817A Series: Similar voltage regulators with different output voltages (e.g., S-817A33AY-Z2-U)
  2. S-817B Series: Voltage regulators with higher output current capacity (e.g., S-817B50AY-Z2-U)
  3. S-817C Series: Voltage regulators with lower dropout voltage (e.g., S-817C25AY-Z2-U)

These alternative models offer flexibility in choosing the appropriate voltage regulator based on specific requirements.

In conclusion, the S-817B48AY-Z2-U is a voltage regulator that provides stable and regulated voltage output for various electronic applications. Its compact size, low power consumption, and high reliability make it an ideal choice for space-constrained devices. However, its limited output current capacity restricts its use in high-power applications.

기술 솔루션에 S-817B48AY-Z2-U 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of S-817B48AY-Z2-U in technical solutions:

  1. Q: What is the S-817B48AY-Z2-U? A: The S-817B48AY-Z2-U is a voltage detector IC (integrated circuit) manufactured by a specific company.

  2. Q: What is the purpose of the S-817B48AY-Z2-U? A: The S-817B48AY-Z2-U is designed to monitor the voltage level in electronic circuits and provide an output signal when the voltage falls below a certain threshold.

  3. Q: How does the S-817B48AY-Z2-U work? A: The S-817B48AY-Z2-U compares the input voltage with a reference voltage internally set within the IC. If the input voltage drops below the reference voltage, it triggers an output signal.

  4. Q: What is the operating voltage range of the S-817B48AY-Z2-U? A: The S-817B48AY-Z2-U operates within a voltage range of X volts to Y volts. (Replace X and Y with the actual values specified in the datasheet)

  5. Q: Can the S-817B48AY-Z2-U be used in automotive applications? A: Yes, the S-817B48AY-Z2-U is suitable for automotive applications as it can withstand the required temperature and voltage ranges.

  6. Q: What is the output type of the S-817B48AY-Z2-U? A: The S-817B48AY-Z2-U has an open-drain output, which means it can sink current but cannot source current.

  7. Q: What is the typical quiescent current of the S-817B48AY-Z2-U? A: The typical quiescent current of the S-817B48AY-Z2-U is X microamps. (Replace X with the actual value specified in the datasheet)

  8. Q: Can the S-817B48AY-Z2-U be used in battery-powered applications? A: Yes, the low quiescent current of the S-817B48AY-Z2-U makes it suitable for battery-powered applications where power consumption is critical.

  9. Q: What is the accuracy of the voltage detection threshold in the S-817B48AY-Z2-U? A: The accuracy of the voltage detection threshold in the S-817B48AY-Z2-U is typically within X volts. (Replace X with the actual value specified in the datasheet)

  10. Q: Is the S-817B48AY-Z2-U available in different package options? A: Yes, the S-817B48AY-Z2-U is available in various package options such as SOT-23-5, SNT-6A, etc.