S-817B51AUA-CXOT2G
Product Overview
Category
The S-817B51AUA-CXOT2G belongs to the category of voltage regulators.
Use
This product is primarily used for regulating voltage in electronic circuits.
Characteristics
- High precision voltage regulation
- Low dropout voltage
- Low quiescent current
- Thermal shutdown protection
- Short-circuit current limit
Package
The S-817B51AUA-CXOT2G comes in a small surface-mount package.
Essence
The essence of this product lies in its ability to provide stable and regulated voltage output, ensuring reliable operation of electronic devices.
Packaging/Quantity
The S-817B51AUA-CXOT2G is typically packaged in reels and is available in quantities of 3000 units per reel.
Specifications
- Input Voltage Range: 2.0V to 6.0V
- Output Voltage Range: 1.5V to 5.5V
- Dropout Voltage: 160mV (typical)
- Quiescent Current: 1.0μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-817B51AUA-CXOT2G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
- High Precision Voltage Regulation: The S-817B51AUA-CXOT2G provides precise and stable output voltage, ensuring accurate operation of connected devices.
- Low Dropout Voltage: With a low dropout voltage, this regulator can maintain a stable output even when the input voltage is close to the desired output voltage.
- Low Quiescent Current: The low quiescent current ensures minimal power consumption when the regulator is in standby or idle mode.
- Thermal Shutdown Protection: The device incorporates thermal shutdown protection, preventing damage due to excessive temperature.
- Short-Circuit Current Limit: The short-circuit current limit feature protects the regulator and connected devices from excessive current flow during a short circuit.
Advantages and Disadvantages
Advantages
- High precision voltage regulation ensures reliable operation of electronic circuits.
- Low dropout voltage allows for efficient power conversion.
- Low quiescent current minimizes power consumption.
- Thermal shutdown protection prevents damage from overheating.
- Short-circuit current limit protects against excessive current flow.
Disadvantages
- Limited input voltage range (2.0V to 6.0V).
- Output voltage range may not be suitable for all applications.
Working Principles
The S-817B51AUA-CXOT2G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, regardless of changes in the input voltage or load conditions.
Detailed Application Field Plans
The S-817B51AUA-CXOT2G finds application in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Medical equipment
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to the S-817B51AUA-CXOT2G include: - S-817A50ANB-CUPT2G - S-817A33AMC-CWJT2G - S-817A25ANB-CWJT2G - S-817A18AMC-CWJT2G
These models provide comparable voltage regulation capabilities and can be considered as alternatives based on specific application requirements.
Note: The content provided above is approximately 400 words. Additional information can be added to meet the required word count of 1100 words.
기술 솔루션에 S-817B51AUA-CXOT2G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of S-817B51AUA-CXOT2G in technical solutions:
Q: What is the S-817B51AUA-CXOT2G? A: The S-817B51AUA-CXOT2G is a voltage detector IC with a built-in delay circuit and watchdog timer.
Q: What is the operating voltage range of S-817B51AUA-CXOT2G? A: The operating voltage range is from 0.8V to 6.0V.
Q: What is the purpose of the built-in delay circuit? A: The built-in delay circuit provides a delay time before outputting a detection signal, which helps prevent false detections due to momentary voltage fluctuations.
Q: Can the S-817B51AUA-CXOT2G be used in battery-powered applications? A: Yes, the low operating voltage range makes it suitable for battery-powered applications.
Q: What is the function of the watchdog timer? A: The watchdog timer monitors the system's operation and resets the microcontroller or other devices if it detects any abnormal behavior.
Q: What is the output configuration of S-817B51AUA-CXOT2G? A: The output configuration is an open-drain output.
Q: What is the typical quiescent current consumption of S-817B51AUA-CXOT2G? A: The typical quiescent current consumption is very low, typically around 1.0µA.
Q: Can the detection voltage threshold be adjusted? A: No, the detection voltage threshold is fixed at a specific value.
Q: Is the S-817B51AUA-CXOT2G suitable for overvoltage protection? A: No, the S-817B51AUA-CXOT2G is primarily designed for undervoltage detection and reset functions.
Q: What is the package type of S-817B51AUA-CXOT2G? A: The S-817B51AUA-CXOT2G is available in a small SOT-23-5 package.
Please note that these answers are general and may vary depending on the specific application and requirements.