ADP1755ACPZ-R7
Product Overview
Category
The ADP1755ACPZ-R7 belongs to the category of voltage regulators.
Use
It is used to regulate voltage in electronic circuits and devices.
Characteristics
- High efficiency
- Low dropout voltage
- Wide input voltage range
- Low quiescent current
Package
The ADP1755ACPZ-R7 comes in a small package, typically a 10-lead LFCSP (QFN) package.
Essence
The essence of this product lies in its ability to provide stable and regulated voltage for various electronic applications.
Packaging/Quantity
It is typically available in reels with a quantity of 3000 units per reel.
Specifications
- Input Voltage Range: 2.3V to 5.5V
- Output Voltage Range: 0.8V to 3.3V
- Maximum Output Current: 1A
- Dropout Voltage: 200mV at 1A
- Quiescent Current: 40µA
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
The detailed pin configuration of the ADP1755ACPZ-R7 is as follows: 1. VIN: Input voltage 2. EN: Enable pin 3. GND: Ground 4. FB: Feedback pin 5. NC: No connection 6. NC: No connection 7. NC: No connection 8. NC: No connection 9. SW: Switch node 10. PGND: Power ground
Functional Features
- Overcurrent protection
- Thermal shutdown
- Short-circuit protection
- Soft start
Advantages
- High efficiency leads to less power dissipation
- Wide input voltage range allows for versatile applications
- Low dropout voltage ensures efficient regulation even with low input voltages
Disadvantages
- Limited maximum output current of 1A
- May require additional external components for specific applications
Working Principles
The ADP1755ACPZ-R7 operates by comparing the feedback voltage with a reference voltage to regulate the output voltage. It uses a control loop to adjust the output voltage based on the input and load conditions.
Detailed Application Field Plans
The ADP1755ACPZ-R7 is suitable for a wide range of applications including: - Battery-powered devices - Portable electronics - Industrial control systems - IoT devices - Consumer electronics
Detailed and Complete Alternative Models
Some alternative models to the ADP1755ACPZ-R7 include: - LM1117 - LT1763 - TPS7A47
In conclusion, the ADP1755ACPZ-R7 is a versatile voltage regulator with high efficiency and a wide input voltage range, making it suitable for various electronic applications.
Word Count: 410
기술 솔루션에 ADP1755ACPZ-R7 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
What is the input voltage range of ADP1755ACPZ-R7?
- The input voltage range of ADP1755ACPZ-R7 is 2.3V to 5.5V.
What is the output voltage range of ADP1755ACPZ-R7?
- The output voltage range of ADP1755ACPZ-R7 is 0.6V to VIN.
What is the maximum output current of ADP1755ACPZ-R7?
- The maximum output current of ADP1755ACPZ-R7 is 1A.
What is the typical efficiency of ADP1755ACPZ-R7?
- The typical efficiency of ADP1755ACPZ-R7 is 92% at 3.3V output and 500mA load.
What are the key features of ADP1755ACPZ-R7?
- The key features of ADP1755ACPZ-R7 include high efficiency, low quiescent current, wide input voltage range, and short-circuit protection.
Does ADP1755ACPZ-R7 have thermal shutdown protection?
- Yes, ADP1755ACPZ-R7 has built-in thermal shutdown protection to prevent overheating.
What type of package does ADP1755ACPZ-R7 come in?
- ADP1755ACPZ-R7 comes in a small, 8-lead LFCSP package for space-constrained applications.
Is ADP1755ACPZ-R7 suitable for battery-powered applications?
- Yes, ADP1755ACPZ-R7 is suitable for battery-powered applications due to its low quiescent current and high efficiency.
Can ADP1755ACPZ-R7 be used in automotive electronics?
- Yes, ADP1755ACPZ-R7 is AEC-Q100 qualified and can be used in automotive electronics.
What are the typical applications for ADP1755ACPZ-R7?
- Typical applications for ADP1755ACPZ-R7 include portable devices, handheld instruments, battery-powered equipment, and automotive systems.