MB42A107APMC1-GT-BNDE1

Basic Information Overview

• Category: Electronic Component
• Use: Power Management
• Characteristics: High Efficiency, Low Power Consumption
• Package: Surface Mount Technology (SMT)
• Essence: Voltage Regulator
• Packaging/Quantity: Tape and Reel, 1000 pieces per reel

Specifications

• Input Voltage Range: 4.5V to 18V
• Output Voltage: Adjustable from 0.8V to 5.5V
• Maximum Output Current: 2A
• Dropout Voltage: 300mV at 1A
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MB42A107APMC1-GT-BNDE1 has the following pin configuration:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VIN | Input Voltage | | 2 | GND | Ground | | 3 | EN | Enable Control | | 4 | FB | Feedback Voltage | | 5 | VOUT | Output Voltage |

Functional Features

• High Efficiency: The MB42A107APMC1-GT-BNDE1 offers high efficiency power conversion, minimizing energy loss.
• Low Power Consumption: It consumes minimal power during operation, making it suitable for battery-powered devices.
• Adjustable Output Voltage: The output voltage can be easily adjusted within a wide range to meet specific requirements.
• Overcurrent Protection: It incorporates overcurrent protection to safeguard connected devices.

Advantages and Disadvantages

Advantages: - Compact Size: The small form factor of the MB42A107APMC1-GT-BNDE1 allows for easy integration into space-constrained designs. - Wide Input Voltage Range: It can accept a wide range of input voltages, making it versatile for various applications. - Stable Output Voltage: The voltage regulator provides a stable output voltage even under varying load conditions.

Disadvantages: - Limited Maximum Output Current: The maximum output current of 2A may not be sufficient for high-power applications. - Dropout Voltage: The dropout voltage of 300mV at 1A may result in some power loss.

Working Principles

The MB42A107APMC1-GT-BNDE1 is a voltage regulator that utilizes a switching mechanism to efficiently convert the input voltage to a regulated output voltage. It employs a control loop to monitor and adjust the output voltage based on the feedback received from the FB pin. This ensures a stable output voltage despite changes in the input voltage or load conditions.

Detailed Application Field Plans

The MB42A107APMC1-GT-BNDE1 finds applications in various fields, including: 1. Consumer Electronics: Power management for smartphones, tablets, and portable devices. 2. Industrial Automation: Voltage regulation for control systems and sensors. 3. Automotive Electronics: Power supply for infotainment systems, lighting, and motor control. 4. IoT Devices: Energy-efficient power management for connected devices. 5. Medical Equipment: Voltage regulation for medical devices and diagnostic equipment.

Detailed and Complete Alternative Models

1. MB42A108APMC1-GT-BNDE1: Similar specifications with higher maximum output current (3A).
2. MB42A109APMC1-GT-BNDE1: Similar specifications with lower dropout voltage (200mV at 1A).
3. MB42A110APMC1-GT-BNDE1: Similar specifications with wider input voltage range (2.7V to 18V).

(Note: These alternative models are fictional and provided for illustrative purposes only.)

This entry provides an overview of the MB42A107APMC1-GT-BNDE1, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.