Cypress Semiconductor Corp
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MB91F376GPMC3-GS

MB91F376GPMC3-GS

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, automotive applications
  • Characteristics: High-performance, low-power consumption, advanced peripherals
  • Package: LQFP (Low-profile Quad Flat Package)
  • Essence: 32-bit RISC microcontroller
  • Packaging/Quantity: Tray packaging, 100 units per tray

Specifications

  • Architecture: ARM Cortex-M3
  • Clock Speed: Up to 80 MHz
  • Flash Memory: 256 KB
  • RAM: 32 KB
  • Operating Voltage: 2.7V - 5.5V
  • I/O Pins: 48
  • Communication Interfaces: UART, SPI, I2C, CAN
  • Analog-to-Digital Converter: 12-bit, 8 channels
  • Timers/Counters: 16-bit and 32-bit timers
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MB91F376GPMC3-GS microcontroller has a total of 48 I/O pins. The pin configuration is as follows:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | PA0 | GPIO | | 2 | PA1 | GPIO | | ... | ... | ... | | 47 | PD14 | GPIO | | 48 | PD15 | GPIO |

Functional Features

  • High-performance ARM Cortex-M3 core for efficient processing
  • Advanced peripherals for enhanced functionality
  • Low-power consumption for energy-efficient designs
  • Extensive communication interfaces for seamless connectivity
  • Flexible analog-to-digital converter for accurate sensor readings
  • Timers/counters for precise timing and event management

Advantages and Disadvantages

Advantages

  • Powerful processing capabilities
  • Wide range of communication interfaces
  • Low power consumption
  • Flexible analog-to-digital converter

Disadvantages

  • Limited flash memory and RAM capacity
  • Relatively high operating temperature range

Working Principles

The MB91F376GPMC3-GS microcontroller operates based on the ARM Cortex-M3 architecture. It executes instructions stored in its flash memory to perform various tasks. The microcontroller interacts with external devices through its I/O pins and communication interfaces. It utilizes its advanced peripherals to provide additional functionality, such as UART, SPI, I2C, and CAN communication.

Detailed Application Field Plans

The MB91F376GPMC3-GS microcontroller is widely used in automotive applications, including engine control units, body control modules, and infotainment systems. Its high-performance capabilities, low-power consumption, and extensive communication interfaces make it suitable for demanding automotive environments.

Alternative Models

  • MB91F376GPMC3-GS2: Similar specifications but with increased flash memory capacity (512 KB)
  • MB91F376GPMC3-GS4: Similar specifications but with increased RAM capacity (64 KB)
  • MB91F376GPMC3-GS5: Similar specifications but with extended operating temperature range (-40°C to +105°C)

Note: This entry has a total word count of 345 words. Additional content is required to meet the 1100-word requirement.

기술 솔루션에 MB91F376GPMC3-GS 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of MB91F376GPMC3-GS in technical solutions:

  1. Q: What is MB91F376GPMC3-GS? A: MB91F376GPMC3-GS is a microcontroller unit (MCU) manufactured by Fujitsu. It is commonly used in various technical solutions due to its advanced features and capabilities.

  2. Q: What are the key features of MB91F376GPMC3-GS? A: Some key features of MB91F376GPMC3-GS include a high-performance 32-bit RISC CPU, on-chip flash memory, multiple communication interfaces, analog-to-digital converters, and various timers and interrupts.

  3. Q: What technical solutions can MB91F376GPMC3-GS be used for? A: MB91F376GPMC3-GS can be used in a wide range of applications such as automotive systems, industrial automation, consumer electronics, medical devices, and more.

  4. Q: How much flash memory does MB91F376GPMC3-GS have? A: MB91F376GPMC3-GS has a built-in flash memory with a capacity of XX kilobytes/megabytes (replace XX with the actual value).

  5. Q: What communication interfaces are available on MB91F376GPMC3-GS? A: MB91F376GPMC3-GS supports various communication interfaces including UART, SPI, I2C, CAN, LIN, and Ethernet.

  6. Q: Can MB91F376GPMC3-GS be programmed using C/C++ language? A: Yes, MB91F376GPMC3-GS can be programmed using C/C++ language. Fujitsu provides a development environment and tools to facilitate software development.

  7. Q: Does MB91F376GPMC3-GS support real-time operating systems (RTOS)? A: Yes, MB91F376GPMC3-GS is compatible with popular real-time operating systems such as FreeRTOS, embOS, and ThreadX.

  8. Q: What voltage range does MB91F376GPMC3-GS operate on? A: MB91F376GPMC3-GS operates on a voltage range of XX volts (replace XX with the actual value).

  9. Q: Can MB91F376GPMC3-GS be used in harsh environments? A: Yes, MB91F376GPMC3-GS is designed to withstand harsh environments and has built-in protection features against temperature, humidity, and electromagnetic interference.

  10. Q: Are there any evaluation boards or development kits available for MB91F376GPMC3-GS? A: Yes, Fujitsu provides evaluation boards and development kits specifically designed for MB91F376GPMC3-GS, which include necessary hardware and software components for easy prototyping and development.

Please note that the answers provided here are general and may vary depending on the specific requirements and documentation provided by Fujitsu for MB91F376GPMC3-GS.