Cypress Semiconductor Corp
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MB95F818KPMC-G-UNE2
자세히보기 데이터시트

MB95F818KPMC-G-UNE2

Product Overview

Category

The MB95F818KPMC-G-UNE2 belongs to the category of microcontrollers.

Use

This microcontroller is designed for various applications that require embedded control and processing capabilities.

Characteristics

  • High-performance microcontroller with advanced features
  • Low power consumption
  • Compact size
  • Wide operating voltage range
  • Robust and reliable design

Package

The MB95F818KPMC-G-UNE2 comes in a compact package suitable for surface mount technology (SMT) assembly.

Essence

The essence of this microcontroller lies in its ability to provide efficient control and processing capabilities in a small form factor.

Packaging/Quantity

The MB95F818KPMC-G-UNE2 is typically packaged in reels or trays, depending on the quantity ordered. The exact packaging and quantity can be customized based on customer requirements.

Specifications

  • Microcontroller architecture: 8-bit
  • CPU clock frequency: Up to 16 MHz
  • Flash memory: 32 KB
  • RAM: 2 KB
  • Operating voltage range: 2.7V to 5.5V
  • Number of I/O pins: 20
  • Communication interfaces: UART, SPI, I2C
  • Analog-to-digital converter (ADC): 10-bit resolution, 8 channels
  • Timers/Counters: Multiple timers/counters available
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

The MB95F818KPMC-G-UNE2 has a total of 20 pins, each serving a specific function. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. GND - Ground
  3. P0.0 - General-purpose I/O pin
  4. P0.1 - General-purpose I/O pin
  5. P0.2 - General-purpose I/O pin
  6. P0.3 - General-purpose I/O pin
  7. P0.4 - General-purpose I/O pin
  8. P0.5 - General-purpose I/O pin
  9. P0.6 - General-purpose I/O pin
  10. P0.7 - General-purpose I/O pin
  11. P1.0 - General-purpose I/O pin
  12. P1.1 - General-purpose I/O pin
  13. P1.2 - General-purpose I/O pin
  14. P1.3 - General-purpose I/O pin
  15. P1.4 - General-purpose I/O pin
  16. P1.5 - General-purpose I/O pin
  17. P1.6 - General-purpose I/O pin
  18. P1.7 - General-purpose I/O pin
  19. RESET - Reset pin
  20. XTAL - Crystal oscillator input

Functional Features

  • High-speed processing capabilities for real-time applications
  • Multiple communication interfaces for seamless integration with other devices
  • Analog-to-digital converter for precise measurement and control
  • Timers/counters for accurate timing and event management
  • Low power consumption for energy-efficient operation
  • Robust design for reliable performance in harsh environments

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into space-constrained designs
  • Wide operating voltage range enables compatibility with various power sources
  • Low power consumption extends battery life in portable applications
  • High-performance microcontroller ensures efficient execution of complex tasks
  • Multiple communication interfaces facilitate connectivity with external devices

Disadvantages

  • Limited flash memory and RAM may restrict the complexity of applications
  • 8-bit architecture may not be suitable for certain computationally intensive tasks
  • Lack of built-in peripherals may require additional external components for specific functionalities

Working Principles

The MB95F818KPMC-G-UNE2 operates based on the principles of microcontroller architecture. It executes instructions stored in its flash memory, processes data, and controls various peripherals to perform desired tasks. The CPU fetches instructions from memory, decodes them, and executes them sequentially. Input/output operations are handled through the I/O pins, allowing interaction with external devices.

Detailed Application Field Plans

The MB95F818KPMC-G-UNE2 finds applications in various fields, including but not limited to:

  1. Industrial automation: Control systems, motor control, monitoring devices
  2. Consumer electronics: Home appliances, audio/video equipment, gaming consoles
  3. Automotive: Engine control units, dashboard displays, lighting control
  4. Internet of Things (IoT): Smart home devices, wearable technology, sensor networks
  5. Medical devices: Patient monitoring, diagnostic equipment, infusion pumps

Detailed and Complete Alternative Models

  1. MB95F808KPMC-G-UNE2: Similar microcontroller with reduced flash memory and I/O pins.
  2. MB95F828K

기술 솔루션에 MB95F818KPMC-G-UNE2 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of MB95F818KPMC-G-UNE2 in technical solutions:

  1. Q: What is the MB95F818KPMC-G-UNE2 microcontroller used for? A: The MB95F818KPMC-G-UNE2 microcontroller is commonly used for various technical solutions, including industrial automation, consumer electronics, and automotive applications.

  2. Q: What is the operating voltage range of the MB95F818KPMC-G-UNE2? A: The MB95F818KPMC-G-UNE2 operates within a voltage range of 2.7V to 5.5V.

  3. Q: How much flash memory does the MB95F818KPMC-G-UNE2 have? A: The MB95F818KPMC-G-UNE2 microcontroller has 64KB of flash memory.

  4. Q: Can I use the MB95F818KPMC-G-UNE2 for real-time control applications? A: Yes, the MB95F818KPMC-G-UNE2 supports real-time control applications with its high-performance CPU and integrated peripherals.

  5. Q: Does the MB95F818KPMC-G-UNE2 have built-in communication interfaces? A: Yes, the MB95F818KPMC-G-UNE2 features UART, SPI, and I2C interfaces for easy communication with other devices.

  6. Q: What is the maximum clock frequency of the MB95F818KPMC-G-UNE2? A: The MB95F818KPMC-G-UNE2 can operate at a maximum clock frequency of 20MHz.

  7. Q: Can I use the MB95F818KPMC-G-UNE2 for low-power applications? A: Yes, the MB95F818KPMC-G-UNE2 offers low-power modes and features to optimize power consumption in battery-powered applications.

  8. Q: Does the MB95F818KPMC-G-UNE2 have analog-to-digital converters (ADCs)? A: Yes, the MB95F818KPMC-G-UNE2 has a built-in 10-bit ADC with multiple channels for analog signal conversion.

  9. Q: Is the MB95F818KPMC-G-UNE2 suitable for automotive applications? A: Yes, the MB95F818KPMC-G-UNE2 is designed to meet the requirements of automotive applications, including temperature and voltage ranges.

  10. Q: What development tools are available for programming the MB95F818KPMC-G-UNE2? A: Renesas provides a comprehensive set of development tools, including an integrated development environment (IDE) and software libraries, to program and debug the MB95F818KPMC-G-UNE2 microcontroller.

Please note that these answers are general and may vary depending on the specific application and requirements.