Cypress Semiconductor Corp
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
S25FL116K0XNFIQ11
자세히보기 데이터시트

S25FL116K0XNFIQ11

Product Overview

Category

The S25FL116K0XNFIQ11 belongs to the category of flash memory products.

Use

It is used for storing data in various electronic devices, such as smartphones, tablets, digital cameras, and other consumer electronics.

Characteristics

  • High-speed read and program operations
  • Low power consumption
  • Wide voltage range
  • Small form factor

Package

The S25FL116K0XNFIQ11 is available in a small outline package (SOP) or a ball grid array (BGA) package.

Essence

The essence of the S25FL116K0XNFIQ11 lies in its ability to provide reliable and high-performance data storage for electronic devices.

Packaging/Quantity

The product is typically packaged in reels or trays, with varying quantities depending on customer requirements.

Specifications

  • Memory Size: 16Mb
  • Interface: SPI
  • Voltage Range: 2.7V to 3.6V
  • Operating Temperature: -40°C to 85°C
  • Data Retention: 20 years
  • Erase/Program Cycle Endurance: 100,000 cycles

Detailed Pin Configuration

The detailed pin configuration of the S25FL116K0XNFIQ11 includes the following pins: 1. Chip Select (/CS) 2. Serial Clock (SCK) 3. Serial Data Input (SI) 4. Serial Data Output (SO) 5. Hold (/HOLD) 6. Write Protect (/WP) 7. Power Supply (VCC) 8. Ground (GND)

Functional Features

  • Fast read and program operations
  • Flexible erase capability
  • Security features for data protection
  • Low standby and active power consumption
  • Compatibility with various microcontrollers and host systems

Advantages and Disadvantages

Advantages

  • High-speed data transfer
  • Low power consumption
  • Reliable data retention
  • Compact form factor

Disadvantages

  • Limited storage capacity compared to other flash memory products
  • Higher cost per megabyte compared to traditional hard drives

Working Principles

The S25FL116K0XNFIQ11 operates based on the principles of NAND flash memory technology, utilizing floating gate transistors to store data in a non-volatile manner. When data is written, electrons are trapped in the floating gate, altering the transistor's conductivity and preserving the stored information.

Detailed Application Field Plans

The S25FL116K0XNFIQ11 is suitable for a wide range of applications, including: - Embedded systems - Automotive infotainment - Industrial automation - Networking equipment - Medical devices - Gaming consoles

Detailed and Complete Alternative Models

Some alternative models to the S25FL116K0XNFIQ11 include: - S25FL132K0XNFI011 - S25FL164K0XNFI011 - S25FL256K0XNFI011

In conclusion, the S25FL116K0XNFIQ11 offers high-speed, reliable data storage in a compact form factor, making it an ideal choice for various electronic devices across different industries.

Word Count: 411

기술 솔루션에 S25FL116K0XNFIQ11 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the S25FL116K0XNFIQ11 used for in technical solutions?

    • The S25FL116K0XNFIQ11 is a serial NOR flash memory device commonly used for storing program code, configuration data, and other non-volatile information in embedded systems.

  2. What are the key features of the S25FL116K0XNFIQ11?

    • The S25FL116K0XNFIQ11 features a high-speed SPI interface, low power consumption, and a wide voltage range, making it suitable for various embedded applications.

  3. How much storage capacity does the S25FL116K0XNFIQ11 offer?

    • The S25FL116K0XNFIQ11 provides 16 megabits (2 megabytes) of storage capacity, which is often sufficient for storing firmware, boot code, and other essential data in embedded systems.

  4. What are the typical operating conditions for the S25FL116K0XNFIQ11?

    • The S25FL116K0XNFIQ11 operates within a wide temperature range (-40°C to 85°C) and supports a voltage range of 2.7V to 3.6V, making it suitable for various environmental conditions.

  5. Is the S25FL116K0XNFIQ11 compatible with standard SPI interfaces?

    • Yes, the S25FL116K0XNFIQ11 is designed to be compatible with standard SPI interfaces, allowing for easy integration into existing hardware designs.

  6. Can the S25FL116K0XNFIQ11 be used for over-the-air (OTA) firmware updates?

    • Yes, the S25FL116K0XNFIQ11's fast read and program times make it suitable for OTA firmware updates in IoT devices and other connected systems.

  7. Does the S25FL116K0XNFIQ11 support hardware and software protection features?

    • Yes, the S25FL116K0XNFIQ11 includes hardware and software-based protection features to prevent unauthorized access and ensure data integrity.

  8. What are some common applications for the S25FL116K0XNFIQ11?

    • The S25FL116K0XNFIQ11 is commonly used in industrial automation, automotive electronics, consumer electronics, and networking equipment for storing firmware, boot code, and system configuration data.

  9. What are the advantages of using the S25FL116K0XNFIQ11 over other flash memory options?

    • The S25FL116K0XNFIQ11 offers high performance, reliability, and compatibility with standard SPI interfaces, making it a popular choice for embedded systems.

  10. Where can I find detailed technical documentation for the S25FL116K0XNFIQ11?

    • Detailed technical documentation, including datasheets and application notes, for the S25FL116K0XNFIQ11 can be found on the manufacturer's website or through authorized distributors.