Cypress Semiconductor Corp
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
S29GL01GS10FHI013
자세히보기 데이터시트

S29GL01GS10FHI013

Product Overview

  • Category: Flash Memory
  • Use: Data storage and retrieval in electronic devices
  • Characteristics: High capacity, fast read/write speeds, non-volatile memory
  • Package: Integrated circuit (IC) chip
  • Essence: Non-volatile memory solution for electronic devices
  • Packaging/Quantity: Typically sold in trays or reels, quantity varies based on customer requirements

Specifications

  • Manufacturer: Cypress Semiconductor
  • Memory Type: NOR Flash
  • Density: 1 Gigabit (128 Megabytes)
  • Organization: 128M x 8 bits
  • Voltage Range: 2.7V - 3.6V
  • Operating Temperature: -40°C to +85°C
  • Interface: Parallel
  • Access Time: 70 ns
  • Page Size: 256 bytes
  • Erase/Program Times: 2 ms/5 ms (typical)

Detailed Pin Configuration

The S29GL01GS10FHI013 has a total of 56 pins. The pin configuration is as follows:

  1. VCC (Power Supply)
  2. A0-A19 (Address Inputs)
  3. DQ0-DQ7 (Data Inputs/Outputs)
  4. WE# (Write Enable)
  5. CE# (Chip Enable)
  6. OE# (Output Enable)
  7. RP#/BYTE# (Reset/Byte#)
  8. RY/BY# (Ready/Busy#)
  9. WP#/ACC (Write Protect/Acceleration)
  10. VSS (Ground)

(Note: The remaining pins are not listed here for brevity.)

Functional Features

  • High-speed read and write operations
  • Reliable data retention
  • Sector erase and byte programming capabilities
  • Built-in error correction codes (ECC)
  • Low power consumption
  • Advanced security features (optional)

Advantages

  • Large storage capacity
  • Fast access times
  • Non-volatile memory retains data even when power is disconnected
  • Suitable for a wide range of electronic devices
  • High reliability and durability
  • Easy integration into existing systems

Disadvantages

  • Higher cost compared to other memory technologies
  • Limited endurance (number of erase/write cycles)
  • Requires additional circuitry for interfacing with microcontrollers

Working Principles

The S29GL01GS10FHI013 utilizes NOR flash memory technology. It stores data in a grid of memory cells, where each cell consists of a floating-gate transistor. The presence or absence of an electrical charge on the floating gate determines the stored data value (0 or 1). The memory can be read by applying appropriate voltages to the address and control pins, allowing the data to be retrieved.

Detailed Application Field Plans

The S29GL01GS10FHI013 is widely used in various electronic devices, including:

  1. Mobile phones and smartphones
  2. Tablets and portable media players
  3. Digital cameras and camcorders
  4. Solid-state drives (SSDs)
  5. Automotive electronics
  6. Industrial control systems
  7. Medical equipment
  8. Gaming consoles

Detailed and Complete Alternative Models

  1. S29GL512S10DHI010 - 512 Megabit NOR Flash Memory
  2. S29GL02GS10FHI020 - 2 Gigabit NOR Flash Memory
  3. S29GL04GS10FHI040 - 4 Gigabit NOR Flash Memory
  4. S29GL08GS10FHI080 - 8 Gigabit NOR Flash Memory
  5. S29GL16GS10FHI160 - 16 Gigabit NOR Flash Memory

(Note: The list above includes only a few alternative models. There are several other options available in the market.)

This concludes the encyclopedia entry for the S29GL01GS10FHI013 flash memory product.

기술 솔루션에 S29GL01GS10FHI013 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of S29GL01GS10FHI013 in technical solutions:

  1. Question: What is the S29GL01GS10FHI013?
    Answer: The S29GL01GS10FHI013 is a flash memory device manufactured by Cypress Semiconductor. It has a capacity of 1 gigabit and operates at a voltage of 3.3V.

  2. Question: What are the typical applications of S29GL01GS10FHI013?
    Answer: The S29GL01GS10FHI013 is commonly used in various technical solutions such as embedded systems, automotive electronics, industrial control systems, and consumer electronics.

  3. Question: What is the interface of S29GL01GS10FHI013?
    Answer: The S29GL01GS10FHI013 uses a parallel interface with a 16-bit data bus and supports both synchronous and asynchronous operations.

  4. Question: What is the operating temperature range of S29GL01GS10FHI013?
    Answer: The S29GL01GS10FHI013 can operate within a temperature range of -40°C to +85°C, making it suitable for a wide range of environments.

  5. Question: Does S29GL01GS10FHI013 support hardware and software write protection?
    Answer: Yes, the S29GL01GS10FHI013 provides both hardware and software write protection features to prevent accidental or unauthorized modifications to the stored data.

  6. Question: What is the erase time of S29GL01GS10FHI013?
    Answer: The erase time of S29GL01GS10FHI013 is typically around 2 seconds for a full chip erase operation.

  7. Question: Can S29GL01GS10FHI013 be used for code storage in microcontrollers?
    Answer: Yes, S29GL01GS10FHI013 can be used as a code storage solution for microcontrollers, providing non-volatile memory for program execution.

  8. Question: Does S29GL01GS10FHI013 support random access read operations?
    Answer: Yes, S29GL01GS10FHI013 supports random access read operations, allowing quick retrieval of data from any address location within the memory array.

  9. Question: What is the power consumption of S29GL01GS10FHI013 during active and standby modes?
    Answer: The power consumption of S29GL01GS10FHI013 varies depending on the operating conditions but typically consumes low power during both active and standby modes.

  10. Question: Can S29GL01GS10FHI013 be used in battery-powered devices?
    Answer: Yes, S29GL01GS10FHI013 can be used in battery-powered devices due to its low power consumption characteristics, making it suitable for portable applications.

Please note that these answers are general and may vary based on specific implementation requirements.