S99GL064N0019

Product Overview

• Category: Integrated Circuit (IC)
• Use: Memory storage
• Characteristics: High capacity, fast access speed, non-volatile, compact size
• Package: Surface Mount Technology (SMT)
• Essence: Flash memory chip
• Packaging/Quantity: Available in tape and reel packaging, quantity varies based on customer requirements

Specifications

• Memory Capacity: 64 gigabits (8 gigabytes)
• Access Speed: Up to 100 megahertz
• Interface: Serial Peripheral Interface (SPI)
• Operating Voltage: 2.7V - 3.6V
• Operating Temperature: -40°C to +85°C
• Data Retention: Minimum 20 years
• Erase/Program Cycles: Up to 100,000 cycles

Detailed Pin Configuration

The S99GL064N0019 has a total of 48 pins arranged as follows:

1. VCC (Power Supply)
2. GND (Ground)
3. HOLD (Hold Input)
4. WP (Write Protect Input)
5. SCK (Serial Clock Input)
6. SI (Serial Data Input)
7. SO (Serial Data Output)
8. CE# (Chip Enable Input)
9. RESET# (Reset Input)
10. A0-A22 (Address Inputs)
11. DQ0-DQ15 (Data Inputs/Outputs)

(Note: The pin configuration may vary depending on the specific package variant.)

Functional Features

• High-speed data transfer using SPI interface
• Non-volatile storage for reliable data retention
• Low power consumption for energy efficiency
• Built-in hardware and software write protection mechanisms
• Sector erase and byte program operations for flexible data management
• Error correction code (ECC) support for data integrity

Advantages and Disadvantages

Advantages: - Large storage capacity - Fast access speed - Compact size - Low power consumption - Long data retention period - Reliable data integrity with ECC support

Disadvantages: - Limited erase/program cycles - Higher cost compared to traditional memory technologies

Working Principles

The S99GL064N0019 is based on flash memory technology. It utilizes a grid of floating-gate transistors to store data in an electrically isolated state. The data can be written, read, and erased using electrical signals. The SPI interface allows for easy communication between the chip and the controlling device.

Detailed Application Field Plans

The S99GL064N0019 is widely used in various electronic devices that require non-volatile memory storage. Some common application fields include:

1. Consumer Electronics: Smartphones, tablets, digital cameras, portable media players
2. Automotive: Infotainment systems, navigation systems, engine control units
3. Industrial: Embedded systems, automation equipment, data loggers
4. Networking: Routers, switches, network storage devices
5. Medical: Patient monitoring systems, medical imaging devices

Detailed and Complete Alternative Models

1. S25FL064L - 64 megabit (8 megabyte) flash memory chip by Cypress Semiconductor
2. AT25SF641 - 64 megabit (8 megabyte) serial flash memory chip by Adesto Technologies
3. MX25L6406E - 64 megabit (8 megabyte) serial flash memory chip by Macronix International

(Note: The alternative models listed above are provided as examples and may not be an exhaustive list.)

This entry provides a comprehensive overview of the S99GL064N0019 flash memory chip, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.