Diodes Incorporated
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
1N5241B-T
자세히보기 데이터시트

1N5241B-T

Product Overview

The 1N5241B-T is a Zener diode belonging to the semiconductor category. It is commonly used for voltage regulation and protection in electronic circuits. This diode exhibits characteristics such as precise voltage regulation, low impedance, and high reliability. The package type for the 1N5241B-T is typically through-hole, and it is available in various packaging quantities to suit different production needs.

Specifications

  • Voltage: 10V
  • Power Dissipation: 500mW
  • Zener Voltage Tolerance: ±5%
  • Operating Temperature Range: -65°C to +200°C

Pin Configuration

The 1N5241B-T Zener diode has a standard axial lead configuration with two leads. The anode is connected to the positive terminal of the circuit, while the cathode is connected to the negative terminal.

Functional Features

The 1N5241B-T Zener diode provides stable voltage regulation by allowing current to flow in reverse bias when the voltage reaches its breakdown voltage. This characteristic makes it suitable for applications requiring precise voltage control.

Advantages and Disadvantages

Advantages

  • Precise voltage regulation
  • Low impedance
  • High reliability

Disadvantages

  • Limited power dissipation capability
  • Susceptible to damage from excessive current or voltage spikes

Working Principles

The 1N5241B-T operates based on the principle of the Zener effect, where it maintains a constant voltage across its terminals when operated in the reverse-biased mode. This allows it to regulate voltage within a circuit, providing protection against voltage surges.

Application Field Plans

The 1N5241B-T Zener diode finds extensive use in various electronic applications, including: - Voltage regulation in power supplies - Overvoltage protection in electronic circuits - Signal clamping and limiting - Voltage reference in precision instruments

Alternative Models

For applications requiring similar voltage regulation capabilities, alternative models to the 1N5241B-T include: - 1N5231B-T (5.1V) - 1N5221B-T (3.6V) - 1N5251B-T (15V)

In conclusion, the 1N5241B-T Zener diode offers precise voltage regulation and protection, making it a crucial component in many electronic circuits.

Word Count: 298

기술 솔루션에 1N5241B-T 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the voltage rating of 1N5241B-T?

    • The voltage rating of 1N5241B-T is 10 volts.

  2. What is the maximum current that 1N5241B-T can handle?

    • The maximum current that 1N5241B-T can handle is typically around 150 mA.

  3. What is the typical forward voltage drop of 1N5241B-T?

    • The typical forward voltage drop of 1N5241B-T is around 0.9 volts.

  4. What are the common applications of 1N5241B-T?

    • Common applications of 1N5241B-T include voltage regulation, overvoltage protection, and signal clamping in various electronic circuits.

  5. Is 1N5241B-T suitable for low-power applications?

    • Yes, 1N5241B-T is suitable for low-power applications due to its relatively low current handling capability.

  6. Can 1N5241B-T be used in reverse polarity protection circuits?

    • Yes, 1N5241B-T can be used in reverse polarity protection circuits to prevent damage from reverse voltage conditions.

  7. What is the temperature range for 1N5241B-T?

    • The operating temperature range for 1N5241B-T is typically -65°C to +200°C.

  8. Does 1N5241B-T require a heatsink for certain applications?

    • For high power dissipation applications, a heatsink may be required to ensure proper thermal management.

  9. Are there any equivalent alternatives to 1N5241B-T?

    • Yes, similar alternatives to 1N5241B-T include other Zener diodes with comparable voltage ratings and characteristics.

  10. What are the key parameters to consider when designing with 1N5241B-T?

    • Key parameters to consider include voltage rating, current handling capability, power dissipation, and temperature stability to ensure proper application and performance.