이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
ABZ1117EH-3.3TRG1

ABZ1117EH-3.3TRG1

Product Overview

Category

ABZ1117EH-3.3TRG1 belongs to the category of voltage regulators.

Use

This product is used to regulate and stabilize voltage levels in electronic circuits.

Characteristics

  • Voltage Output: 3.3V
  • Package Type: EH
  • Essence: High-performance voltage regulator
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

The specifications for ABZ1117EH-3.3TRG1 are as follows:

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage: 3.3V ±2%
  • Maximum Output Current: 1A
  • Dropout Voltage: 1.2V (typical)
  • Line Regulation: 0.2% (typical)
  • Load Regulation: 0.4% (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The pin configuration for ABZ1117EH-3.3TRG1 is as follows:

  • Pin 1: VIN (Input Voltage)
  • Pin 2: GND (Ground)
  • Pin 3: VOUT (Output Voltage)

Functional Features

  • Low dropout voltage
  • Excellent line and load regulation
  • Thermal shutdown protection
  • Short circuit current limit
  • Overcurrent protection

Advantages and Disadvantages

Advantages

  • High-performance voltage regulation
  • Wide input voltage range
  • Stable output voltage
  • Compact package size
  • Thermal protection for enhanced safety

Disadvantages

  • Limited maximum output current (1A)
  • Dropout voltage may affect efficiency in low input voltage scenarios

Working Principles

ABZ1117EH-3.3TRG1 operates based on the principle of linear voltage regulation. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. This ensures that the output voltage remains constant even when the input voltage fluctuates.

Detailed Application Field Plans

ABZ1117EH-3.3TRG1 finds applications in various electronic devices and systems, including but not limited to: - Power supplies - Battery-powered devices - Embedded systems - Industrial automation - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to ABZ1117EH-3.3TRG1 include: - LM1117-3.3 - LT1117-3.3 - MCP1703-3.3

These models offer similar functionality and specifications, providing options for different design requirements.

In conclusion, ABZ1117EH-3.3TRG1 is a high-performance voltage regulator with a wide range of applications. Its stable output voltage, compact package size, and thermal protection make it suitable for various electronic devices and systems. However, designers should consider its limited maximum output current and dropout voltage when selecting this product for specific applications.

기술 솔루션에 ABZ1117EH-3.3TRG1 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of ABZ1117EH-3.3TRG1 in technical solutions:

Q1: What is ABZ1117EH-3.3TRG1? A1: ABZ1117EH-3.3TRG1 is a voltage regulator IC that provides a fixed output voltage of 3.3V.

Q2: What is the input voltage range for ABZ1117EH-3.3TRG1? A2: The input voltage range for ABZ1117EH-3.3TRG1 is typically between 4.5V and 15V.

Q3: What is the maximum output current of ABZ1117EH-3.3TRG1? A3: The maximum output current of ABZ1117EH-3.3TRG1 is 1A.

Q4: Can ABZ1117EH-3.3TRG1 be used in battery-powered applications? A4: Yes, ABZ1117EH-3.3TRG1 can be used in battery-powered applications as long as the input voltage is within the specified range.

Q5: Does ABZ1117EH-3.3TRG1 require any external components for operation? A5: Yes, ABZ1117EH-3.3TRG1 requires input and output capacitors for stable operation. Refer to the datasheet for recommended values.

Q6: Is ABZ1117EH-3.3TRG1 suitable for low-power applications? A6: Yes, ABZ1117EH-3.3TRG1 is suitable for low-power applications due to its low dropout voltage and low quiescent current.

Q7: Can ABZ1117EH-3.3TRG1 handle input voltage fluctuations? A7: Yes, ABZ1117EH-3.3TRG1 has built-in protection features that allow it to handle input voltage fluctuations within its specified range.

Q8: Can ABZ1117EH-3.3TRG1 be used in automotive applications? A8: Yes, ABZ1117EH-3.3TRG1 is designed to meet automotive requirements and can be used in automotive applications.

Q9: What is the thermal resistance of ABZ1117EH-3.3TRG1? A9: The thermal resistance of ABZ1117EH-3.3TRG1 is typically around 50°C/W, which determines its ability to dissipate heat.

Q10: Is ABZ1117EH-3.3TRG1 available in different package options? A10: Yes, ABZ1117EH-3.3TRG1 is available in various package options such as SOT-223, TO-252, and D2PAK, allowing flexibility in design and mounting.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.