Diodes Incorporated
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
AP1184T5-L-U
자세히보기 데이터시트

AP1184T5-L-U

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Regulator
  • Characteristics:
    • Low dropout voltage
    • High output current capability
    • Thermal shutdown protection
    • Short circuit current limit
  • Package: TO-220
  • Essence: Linear voltage regulator
  • Packaging/Quantity: Tape and Reel, 1000 pieces per reel

Specifications

  • Input Voltage Range: 2.5V to 7V
  • Output Voltage: 5V
  • Output Current: Up to 3A
  • Dropout Voltage: 1.3V typical at 3A
  • Line Regulation: ±0.2% typical
  • Load Regulation: ±0.4% typical
  • Quiescent Current: 75mA typical
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The AP1184T5-L-U has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Low dropout voltage allows for efficient regulation even with small input-output differentials.
  • High output current capability enables the IC to power a wide range of devices.
  • Thermal shutdown protection prevents damage due to excessive heat.
  • Short circuit current limit protects the IC and connected components from damage in case of a short circuit.

Advantages and Disadvantages

Advantages: - Low dropout voltage ensures efficient power conversion. - High output current capability makes it suitable for various applications. - Thermal shutdown protection enhances reliability. - Short circuit current limit safeguards against potential damage.

Disadvantages: - Limited input voltage range (2.5V to 7V). - Quiescent current of 75mA may be relatively high for low-power applications.

Working Principles

The AP1184T5-L-U is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with a fraction of the output voltage, adjusting the pass transistor accordingly to maintain a stable output voltage.

Detailed Application Field Plans

The AP1184T5-L-U can be used in various applications, including but not limited to: - Power supplies for microcontrollers and other digital circuits - Battery-powered devices requiring a regulated 5V supply - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the AP1184T5-L-U are: - LM7805: A widely used linear voltage regulator with a fixed 5V output. - LT1084: Adjustable linear voltage regulator with higher output current capability. - TPS7A4700: Low dropout voltage regulator with adjustable output voltage.

These alternative models provide options based on specific requirements and design considerations.

Word count: 275 words

기술 솔루션에 AP1184T5-L-U 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of AP1184T5-L-U in technical solutions:

  1. Q: What is AP1184T5-L-U? A: AP1184T5-L-U is a specific model of power management integrated circuit (PMIC) commonly used in technical solutions.

  2. Q: What are the key features of AP1184T5-L-U? A: Some key features of AP1184T5-L-U include high efficiency, low dropout voltage, thermal shutdown protection, and overcurrent protection.

  3. Q: What is the input voltage range for AP1184T5-L-U? A: The input voltage range for AP1184T5-L-U typically ranges from 2.5V to 5.5V.

  4. Q: What is the output voltage range for AP1184T5-L-U? A: The output voltage range for AP1184T5-L-U can be adjusted using external resistors, but it typically ranges from 0.8V to 5V.

  5. Q: Can AP1184T5-L-U handle high current loads? A: Yes, AP1184T5-L-U has a maximum output current rating of typically 1.5A, making it suitable for various applications.

  6. Q: Is AP1184T5-L-U suitable for battery-powered devices? A: Yes, AP1184T5-L-U is designed to operate efficiently with low dropout voltage, making it suitable for battery-powered devices.

  7. Q: Does AP1184T5-L-U have any built-in protection features? A: Yes, AP1184T5-L-U includes thermal shutdown protection and overcurrent protection to safeguard against excessive heat and current.

  8. Q: Can AP1184T5-L-U be used in automotive applications? A: Yes, AP1184T5-L-U is designed to meet automotive-grade requirements and can be used in automotive applications.

  9. Q: What is the typical operating temperature range for AP1184T5-L-U? A: The typical operating temperature range for AP1184T5-L-U is from -40°C to +85°C.

  10. Q: Are there any application notes or reference designs available for AP1184T5-L-U? A: Yes, the manufacturer of AP1184T5-L-U typically provides application notes and reference designs to assist with its implementation in various technical solutions.

Please note that the specific details may vary depending on the manufacturer's documentation and datasheet for AP1184T5-L-U.