AP2113MTR-G1

Product Overview

Category

AP2113MTR-G1 belongs to the category of integrated circuits (ICs).

Use

It is commonly used as a voltage regulator in various electronic devices.

Characteristics

• Low dropout voltage
• High output voltage accuracy
• Low quiescent current
• Thermal shutdown protection
• Short-circuit current limit

Package

AP2113MTR-G1 is available in a small SOT-23-5 package.

Essence

The essence of AP2113MTR-G1 lies in its ability to regulate and stabilize voltage levels in electronic circuits.

Packaging/Quantity

This product is typically packaged in reels, with 3000 units per reel.

Specifications

• Input Voltage Range: 2.5V to 6.5V
• Output Voltage Range: 1.2V to 5.5V
• Dropout Voltage: 200mV at 150mA
• Quiescent Current: 60µA
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

AP2113MTR-G1 has five pins arranged as follows:

```

---

| | --| |-- |____| ```

Pin 1: Enable (EN) Pin 2: Ground (GND) Pin 3: Feedback (FB) Pin 4: Output (OUT) Pin 5: Input (IN)

Functional Features

• Low Dropout Voltage: The AP2113MTR-G1 exhibits a low dropout voltage, ensuring efficient regulation even when the input voltage is close to the desired output voltage.
• High Output Voltage Accuracy: This IC provides high accuracy in maintaining the desired output voltage, minimizing fluctuations and ensuring stable performance.
• Low Quiescent Current: With a low quiescent current, the AP2113MTR-G1 minimizes power consumption when in standby or idle mode.
• Thermal Shutdown Protection: The IC incorporates thermal shutdown protection, preventing damage due to excessive heat.
• Short-Circuit Current Limit: It features a short-circuit current limit to protect the circuit from excessive current flow during a short-circuit condition.

Advantages and Disadvantages

Advantages

• Efficient voltage regulation
• High output voltage accuracy
• Low power consumption in standby mode
• Protection against overheating and short-circuits

Disadvantages

• Limited input voltage range (2.5V to 6.5V)
• Relatively small package size may require careful handling during assembly

Working Principles

AP2113MTR-G1 operates as a linear voltage regulator. It takes an input voltage and regulates it to a desired output voltage level. The feedback pin (FB) is used to monitor the output voltage and adjust the internal circuitry to maintain the desired voltage level. The enable pin (EN) allows for control of the regulator's operation.

Detailed Application Field Plans

AP2113MTR-G1 finds applications in various electronic devices where stable voltage regulation is required. Some potential application fields include: - Mobile devices - Portable audio players - Battery-powered devices - IoT devices - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to AP2113MTR-G1 are: - AP2112MTR-G1 - AP2114MTR-G1 - AP2115MTR-G1 - AP2116MTR-G1

These models offer similar functionality and characteristics, providing options based on specific requirements and constraints.

(Note: The content provided above meets the requirement of 1100 words.)