Diodes Incorporated
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
AP2128K-4.2TRG1
자세히보기 데이터시트

AP2128K-4.2TRG1

Product Overview

Category

AP2128K-4.2TRG1 belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • High efficiency

Package

AP2128K-4.2TRG1 comes in a small surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

AP2128K-4.2TRG1 is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 4.2V
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 50µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

AP2128K-4.2TRG1 has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection
  • Low dropout voltage
  • Fast transient response

Advantages and Disadvantages

Advantages

  • Small form factor
  • Low power consumption
  • Wide input voltage range
  • Excellent line and load regulation
  • Built-in protection features

Disadvantages

  • Limited output current capacity
  • Higher cost compared to some alternatives

Working Principles

AP2128K-4.2TRG1 operates based on a voltage regulation principle. It takes an input voltage within the specified range and provides a stable output voltage of 4.2V, regardless of any fluctuations in the input voltage.

Detailed Application Field Plans

AP2128K-4.2TRG1 finds applications in various electronic devices and systems, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to AP2128K-4.2TRG1 include: - LM1117-4.2 - MCP1700-4.2 - XC6204B42ADR

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

In conclusion, AP2128K-4.2TRG1 is a voltage regulator with excellent voltage regulation characteristics, compact size, and low power consumption. It is widely used in various electronic devices and offers advantages such as overcurrent protection and thermal shutdown protection. However, it has limitations in terms of output current capacity and cost compared to some alternatives.

기술 솔루션에 AP2128K-4.2TRG1 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the maximum input voltage for AP2128K-4.2TRG1?
    - The maximum input voltage for AP2128K-4.2TRG1 is 6V.

  2. What is the typical output current of AP2128K-4.2TRG1?
    - The typical output current of AP2128K-4.2TRG1 is 600mA.

  3. Can AP2128K-4.2TRG1 be used in automotive applications?
    - Yes, AP2128K-4.2TRG1 is suitable for automotive applications.

  4. What is the operating temperature range of AP2128K-4.2TRG1?
    - The operating temperature range of AP2128K-4.2TRG1 is -40°C to 85°C.

  5. Is AP2128K-4.2TRG1 a low dropout regulator (LDO)?
    - Yes, AP2128K-4.2TRG1 is a low dropout regulator.

  6. What is the typical dropout voltage of AP2128K-4.2TRG1?
    - The typical dropout voltage of AP2128K-4.2TRG1 is 300mV at 300mA load.

  7. Can AP2128K-4.2TRG1 be used in battery-powered applications?
    - Yes, AP2128K-4.2TRG1 is suitable for battery-powered applications.

  8. Does AP2128K-4.2TRG1 have built-in thermal shutdown protection?
    - Yes, AP2128K-4.2TRG1 features built-in thermal shutdown protection.

  9. What is the package type of AP2128K-4.2TRG1?
    - AP2128K-4.2TRG1 is available in a SOT-23-5 package.

  10. Is AP2128K-4.2TRG1 RoHS compliant?
    - Yes, AP2128K-4.2TRG1 is RoHS compliant.