제품 세부사항은 사양을 확인하세요.
AZ1086H-5.0TRG1
Product Overview
Category
AZ1086H-5.0TRG1 belongs to the category of voltage regulators.
Use
This product is commonly used in electronic circuits to regulate and stabilize voltage levels.
Characteristics
- Voltage Output: 5.0V
- Package Type: TO-263
- Essence: Linear voltage regulator
- Packaging/Quantity: Tape and Reel, 2500 units per reel
Specifications
The specifications for AZ1086H-5.0TRG1 are as follows:
- Input Voltage Range: 7V to 20V
- Dropout Voltage: 1.2V (typical)
- Output Current: Up to 1.5A
- Line Regulation: 0.015% (typical)
- Load Regulation: 0.1% (typical)
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
The pin configuration of AZ1086H-5.0TRG1 is as follows:
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
Functional Features
- High accuracy and low dropout voltage
- Overcurrent and thermal protection
- Fast transient response
- Adjustable output voltage with external resistors
Advantages and Disadvantages
Advantages
- Provides a stable and regulated output voltage
- Suitable for a wide range of input voltages
- Offers protection against overcurrent and thermal issues
- Allows for adjustable output voltage
Disadvantages
- Dropout voltage may cause power dissipation and heat generation
- Requires additional external components for proper operation
Working Principles
AZ1086H-5.0TRG1 operates based on the principle of linear voltage regulation. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. The device compares the output voltage with a reference voltage and adjusts the pass transistor accordingly to maintain a stable output.
Detailed Application Field Plans
AZ1086H-5.0TRG1 finds applications in various electronic devices and systems, including but not limited to: - Power supplies - Battery chargers - Automotive electronics - Industrial control systems - Audio amplifiers
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to AZ1086H-5.0TRG1 are: - LM317T - LT1086 - LM1117 - ADJ1117
These models offer similar functionality and can be used as substitutes depending on specific requirements.
In conclusion, AZ1086H-5.0TRG1 is a voltage regulator with a 5.0V output. It provides stable voltage regulation, has various protection features, and can be used in a wide range of applications.
기술 솔루션에 AZ1086H-5.0TRG1 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of AZ1086H-5.0TRG1 in technical solutions:
Q1: What is AZ1086H-5.0TRG1? A1: AZ1086H-5.0TRG1 is a voltage regulator IC (integrated circuit) that provides a fixed output voltage of 5.0V.
Q2: What is the input voltage range for AZ1086H-5.0TRG1? A2: The input voltage range for AZ1086H-5.0TRG1 is typically between 7V and 20V.
Q3: What is the maximum output current of AZ1086H-5.0TRG1? A3: The maximum output current of AZ1086H-5.0TRG1 is 1.5A.
Q4: Can AZ1086H-5.0TRG1 be used in battery-powered applications? A4: Yes, AZ1086H-5.0TRG1 can be used in battery-powered applications as long as the input voltage is within the specified range.
Q5: Is AZ1086H-5.0TRG1 suitable for low-power applications? A5: Yes, AZ1086H-5.0TRG1 can be used in low-power applications as it has a low dropout voltage and low quiescent current.
Q6: Can AZ1086H-5.0TRG1 handle high temperatures? A6: Yes, AZ1086H-5.0TRG1 is designed to operate at high temperatures and has built-in thermal shutdown protection.
Q7: Does AZ1086H-5.0TRG1 require any external components for operation? A7: Yes, AZ1086H-5.0TRG1 requires a few external components such as input and output capacitors for stability.
Q8: Can AZ1086H-5.0TRG1 be used in automotive applications? A8: Yes, AZ1086H-5.0TRG1 is suitable for automotive applications as it meets the required standards and has a wide operating temperature range.
Q9: What are the typical applications of AZ1086H-5.0TRG1? A9: Some typical applications of AZ1086H-5.0TRG1 include power supplies, battery chargers, industrial control systems, and automotive electronics.
Q10: Is AZ1086H-5.0TRG1 available in different package options? A10: Yes, AZ1086H-5.0TRG1 is available in various package options such as TO-263, TO-252, and SOT-223, providing flexibility for different design requirements.
Please note that these answers are general and may vary depending on the specific technical solution and application requirements.