이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
AZ1117CR-1.8TRG1

AZ1117CR-1.8TRG1

Product Overview

Category

AZ1117CR-1.8TRG1 belongs to the category of voltage regulators.

Use

This product is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage Output: 1.8V
  • Package Type: TO-252
  • Essence: Linear voltage regulator
  • Packaging/Quantity: Available in reels, with a quantity of [specify quantity]

Specifications

The specifications for AZ1117CR-1.8TRG1 are as follows:

  • Input Voltage Range: [specify range]
  • Output Current: [specify current rating]
  • Dropout Voltage: [specify value]
  • Line Regulation: [specify value]
  • Load Regulation: [specify value]
  • Operating Temperature Range: [specify range]
  • Reference Voltage: [specify value]

Detailed Pin Configuration

AZ1117CR-1.8TRG1 has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage
  • High output accuracy
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages

  • Provides stable and regulated output voltage
  • Suitable for low-power applications
  • Offers protection against various faults
  • Compact package size

Disadvantages

  • Limited input voltage range
  • Generates heat during operation

Working Principles

AZ1117CR-1.8TRG1 operates on the principle of linear voltage regulation. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. The internal circuitry compares the reference voltage with the feedback voltage to maintain a constant output voltage.

Detailed Application Field Plans

AZ1117CR-1.8TRG1 finds applications in various electronic devices and systems, including:

  1. Battery-powered devices
  2. Embedded systems
  3. Consumer electronics
  4. Automotive electronics
  5. Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to AZ1117CR-1.8TRG1 include:

  1. LM1117-1.8
  2. LT1117-1.8
  3. MCP1701-1802E/TO

These models offer similar functionality and can be used as alternatives depending on specific requirements.

In conclusion, AZ1117CR-1.8TRG1 is a voltage regulator that provides stable and regulated output voltage for various electronic applications. Its low dropout voltage, high accuracy, and protection features make it suitable for a wide range of low-power devices. However, it has limitations in terms of input voltage range and heat generation during operation.

기술 솔루션에 AZ1117CR-1.8TRG1 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of AZ1117CR-1.8TRG1 in technical solutions:

Q1: What is AZ1117CR-1.8TRG1? A1: AZ1117CR-1.8TRG1 is a low dropout voltage regulator that provides a fixed output voltage of 1.8V.

Q2: What is the maximum input voltage for AZ1117CR-1.8TRG1? A2: The maximum input voltage for AZ1117CR-1.8TRG1 is 15V.

Q3: What is the dropout voltage of AZ1117CR-1.8TRG1? A3: The dropout voltage of AZ1117CR-1.8TRG1 is typically around 1.1V at a load current of 800mA.

Q4: What is the maximum output current of AZ1117CR-1.8TRG1? A4: The maximum output current of AZ1117CR-1.8TRG1 is 1A.

Q5: Can AZ1117CR-1.8TRG1 be used in battery-powered applications? A5: Yes, AZ1117CR-1.8TRG1 can be used in battery-powered applications as it has a low quiescent current and low dropout voltage.

Q6: Is AZ1117CR-1.8TRG1 suitable for use in automotive applications? A6: Yes, AZ1117CR-1.8TRG1 is suitable for use in automotive applications as it meets the AEC-Q100 standard.

Q7: Does AZ1117CR-1.8TRG1 have built-in thermal shutdown protection? A7: Yes, AZ1117CR-1.8TRG1 has built-in thermal shutdown protection to prevent overheating.

Q8: Can AZ1117CR-1.8TRG1 be used in both positive and negative voltage applications? A8: No, AZ1117CR-1.8TRG1 is designed for positive voltage applications only.

Q9: What is the operating temperature range of AZ1117CR-1.8TRG1? A9: The operating temperature range of AZ1117CR-1.8TRG1 is -40°C to +125°C.

Q10: Does AZ1117CR-1.8TRG1 require any external components for operation? A10: Yes, AZ1117CR-1.8TRG1 requires input and output capacitors for stability and proper operation.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.