Diodes Incorporated
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
BZT52C51S-13
자세히보기 데이터시트

BZT52C51S-13

Introduction

The BZT52C51S-13 is a diode belonging to the category of Zener diodes. This component is commonly used in electronic circuits for voltage regulation and protection against voltage spikes. The following entry provides an overview of the basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the BZT52C51S-13.

Basic Information Overview

  • Category: Zener Diode
  • Use: Voltage regulation and protection
  • Characteristics:
    • Reverse breakdown voltage: 51V
    • Power dissipation: 300mW
    • Operating temperature range: -65°C to +150°C
  • Package: SOD-123
  • Essence: Semiconductor diode for voltage regulation
  • Packaging/Quantity: Typically available in reels or tubes containing multiple units

Specifications

  • Reverse Breakdown Voltage (Vz): 51V
  • Power Dissipation (Pd): 300mW
  • Operating Temperature Range: -65°C to +150°C
  • Package Type: SOD-123
  • Forward Voltage Drop (Vf): 1.2V
  • Maximum Zener Impedance (ZZT): 20Ω
  • Maximum Reverse Leakage Current (IR): 5μA

Detailed Pin Configuration

The BZT52C51S-13 Zener diode has two pins: 1. Anode (A) 2. Cathode (K)

Functional Features

  • Voltage Regulation: The BZT52C51S-13 maintains a constant voltage drop across its terminals when it is reverse-biased.
  • Protection: It protects sensitive components in a circuit by limiting the voltage across them.

Advantages and Disadvantages

Advantages

  • Precise voltage regulation
  • Compact size
  • Wide operating temperature range

Disadvantages

  • Limited power dissipation capability
  • Susceptible to damage from excessive current or voltage spikes

Working Principles

The BZT52C51S-13 operates based on the principle of the Zener effect, where it exhibits a controlled breakdown at a specific reverse voltage, allowing current to flow in the reverse direction.

Detailed Application Field Plans

The BZT52C51S-13 is widely used in various electronic applications, including: - Voltage regulation in power supplies - Overvoltage protection in electronic circuits - Signal clamping and limiting

Detailed and Complete Alternative Models

Some alternative models to the BZT52C51S-13 include: - BZX84C51 - 1N4733A - MMBZ5231B

In conclusion, the BZT52C51S-13 Zener diode is a crucial component in electronic circuits, providing precise voltage regulation and protection. Its compact size and wide operating temperature range make it suitable for diverse applications in the electronics industry.

[Word count: 411]

기술 솔루션에 BZT52C51S-13 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the maximum power dissipation of BZT52C51S-13?

    • The maximum power dissipation of BZT52C51S-13 is 300mW.

  2. What is the forward voltage drop of BZT52C51S-13?

    • The forward voltage drop of BZT52C51S-13 is typically 0.9V at a forward current of 10mA.

  3. What is the reverse standoff voltage of BZT52C51S-13?

    • The reverse standoff voltage of BZT52C51S-13 is 51V.

  4. What is the operating temperature range of BZT52C51S-13?

    • The operating temperature range of BZT52C51S-13 is -65°C to +150°C.

  5. Is BZT52C51S-13 suitable for overvoltage protection in electronic circuits?

    • Yes, BZT52C51S-13 can be used for overvoltage protection due to its Zener diode characteristics.

  6. Can BZT52C51S-13 be used in voltage regulation applications?

    • Yes, BZT52C51S-13 can be used for simple voltage regulation tasks within its specified parameters.

  7. What is the typical dynamic impedance of BZT52C51S-13?

    • The typical dynamic impedance of BZT52C51S-13 is 500 ohms.

  8. Does BZT52C51S-13 require any external components for proper operation?

    • BZT52C51S-13 can be used independently for many applications, but additional components may be required depending on the specific application.

  9. What are some common applications for BZT52C51S-13?

    • Common applications for BZT52C51S-13 include voltage clamping, overvoltage protection, and voltage regulation in various electronic circuits.

  10. What are the key differences between BZT52C51S-13 and other similar Zener diodes?

    • The key differences lie in the specific electrical characteristics such as voltage tolerance, power dissipation, and dynamic impedance, which should be carefully considered based on the requirements of the technical solution.