Diodes Incorporated
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
BZX84B18-7-F
자세히보기 데이터시트

BZX84B18-7-F: Product Overview and Analysis

Introduction

The BZX84B18-7-F is a crucial component in the field of electronics, belonging to the category of Zener diodes. This entry will provide an in-depth analysis of the BZX84B18-7-F, covering its basic information overview, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Zener diode
  • Use: Voltage regulation and protection in electronic circuits
  • Characteristics: Precise voltage regulation, low leakage current, small package size
  • Package: SOT-23 (SMD)
  • Essence: Zener diode for voltage reference and regulation
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies by manufacturer

Specifications

  • Voltage: 18V
  • Power Dissipation: 350mW
  • Forward Voltage: 0.9V
  • Reverse Current: 5μA
  • Temperature Range: -65°C to +150°C

Detailed Pin Configuration

The BZX84B18-7-F typically has three pins: 1. Anode (A) 2. Cathode (K) 3. No Connection (NC)

Functional Features

  • Voltage Regulation: Maintains a constant output voltage under varying load conditions
  • Overvoltage Protection: Safeguards sensitive components from excessive voltage
  • Stability: Provides stable voltage references for precision applications

Advantages and Disadvantages

Advantages

  • Precise voltage regulation
  • Small package size
  • Low leakage current

Disadvantages

  • Limited power dissipation capability
  • Sensitivity to temperature variations

Working Principles

The BZX84B18-7-F operates based on the Zener effect, where it maintains a nearly constant voltage across its terminals when reverse-biased. This allows it to regulate voltage within electronic circuits and protect sensitive components from overvoltage conditions.

Detailed Application Field Plans

The BZX84B18-7-F finds extensive use in various electronic applications, including: - Voltage regulators in power supplies - Overvoltage protection in communication systems - Voltage references in precision measurement equipment

Detailed and Complete Alternative Models

  • BZX84C18-7-F: Similar characteristics with a slightly different voltage rating
  • BZX84B15-7-F: Lower voltage rating with comparable characteristics
  • BZX84B20-7-F: Higher voltage rating within the same package size

In conclusion, the BZX84B18-7-F Zener diode plays a vital role in voltage regulation and protection within electronic circuits. Its precise characteristics, compact package, and stable performance make it a preferred choice in various applications.

[Word Count: 398]

기술 솔루션에 BZX84B18-7-F 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the BZX84B18-7-F?

    • The BZX84B18-7-F is a 18V Zener diode with a nominal power dissipation of 350mW in a SOT23 package.

  2. What are the typical applications of BZX84B18-7-F?

    • It is commonly used for voltage regulation, overvoltage protection, and voltage reference in various electronic circuits.

  3. What is the maximum forward voltage of BZX84B18-7-F?

    • The maximum forward voltage of BZX84B18-7-F is 0.9V at a forward current of 5mA.

  4. What is the reverse leakage current of BZX84B18-7-F?

    • The reverse leakage current is typically less than 100nA at the working voltage of 13.5V.

  5. What is the temperature coefficient of BZX84B18-7-F?

    • The temperature coefficient is approximately 5mV/°C, which indicates the change in voltage with temperature.

  6. How can BZX84B18-7-F be used for overvoltage protection?

    • By connecting the BZX84B18-7-F in parallel with the load, it can clamp the voltage to its breakdown voltage, protecting the circuit from overvoltage conditions.

  7. What is the power dissipation capability of BZX84B18-7-F?

    • The BZX84B18-7-F has a nominal power dissipation of 350mW, making it suitable for low-power applications.

  8. Can BZX84B18-7-F be used in voltage reference circuits?

    • Yes, it can be used as a stable voltage reference due to its well-defined breakdown voltage.

  9. What is the typical dynamic impedance of BZX84B18-7-F?

    • The typical dynamic impedance is around 20 ohms, indicating its ability to regulate voltage effectively.

  10. What are the key considerations when designing with BZX84B18-7-F?

    • It's important to consider the maximum power dissipation, reverse leakage current, and temperature coefficient to ensure proper functionality in the intended application.