Diodes Incorporated
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
PI3B16248BE
자세히보기 데이터시트

PI3B16248BE

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Signal Switch
  • Characteristics: High-speed, Low-power consumption
  • Package: QFN (Quad Flat No-leads)
  • Essence: Efficient signal switching solution
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Number of Channels: 16
  • Switch Type: Single Pole Double Throw (SPDT)
  • Operating Voltage: 1.65V to 5.5V
  • Operating Temperature: -40°C to +85°C
  • On-Resistance: 4Ω (typical)
  • Bandwidth: 500MHz (typical)
  • Propagation Delay: 0.6ns (typical)
  • Control Interface: Parallel

Detailed Pin Configuration

The PI3B16248BE has a total of 56 pins arranged as follows:

  • Pins 1-8: Channel 1 Control Inputs
  • Pins 9-16: Channel 2 Control Inputs
  • ...
  • Pins 49-56: Channel 16 Control Inputs
  • Pins 17-32: Channel 1 Signal I/O
  • Pins 33-48: Channel 2 Signal I/O
  • ...
  • Pins 49-64: Channel 16 Signal I/O
  • Pins 65-72: Ground (GND)
  • Pins 73-80: Power Supply (VCC)

Functional Features

  • High-speed signal switching with minimal propagation delay
  • Low on-resistance for minimal signal distortion
  • Wide operating voltage range for compatibility with various systems
  • Low power consumption for energy efficiency
  • Robust package design for reliable performance in harsh environments

Advantages and Disadvantages

Advantages: - High-speed switching capability - Low power consumption - Wide operating voltage range - Reliable performance in harsh environments

Disadvantages: - Limited number of channels (16) - Control interface limited to parallel

Working Principles

The PI3B16248BE is designed to efficiently switch signals between multiple channels. It utilizes a combination of high-speed transistors and low-resistance switches to ensure minimal signal distortion and propagation delay. The control inputs determine which channel is active, allowing the desired signal to pass through.

Detailed Application Field Plans

The PI3B16248BE is commonly used in various applications that require efficient signal switching. Some of the key application fields include:

  1. Telecommunications: Used in communication systems for signal routing and switching.
  2. Test and Measurement: Enables the selection of different test signals in measurement equipment.
  3. Audio/Video Systems: Facilitates seamless switching between audio/video sources in multimedia devices.
  4. Industrial Automation: Allows for the control and routing of signals in industrial automation systems.
  5. Data Acquisition: Used in data acquisition systems to select and route analog or digital signals.

Detailed and Complete Alternative Models

  1. PI3B3257: 8-channel signal switch with similar specifications and package.
  2. PI3B16240: 16-channel signal switch with enhanced bandwidth and lower on-resistance.
  3. PI3B3245: 8-bit bidirectional level shifter with similar package and control interface.

These alternative models offer similar functionality and can be considered based on specific requirements.

Word count: 378 words

기술 솔루션에 PI3B16248BE 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of PI3B16248BE in technical solutions:

  1. Q: What is PI3B16248BE? A: PI3B16248BE is a specific integrated circuit (IC) that serves as a bidirectional level shifter and voltage translator.

  2. Q: What is the purpose of PI3B16248BE in technical solutions? A: The purpose of PI3B16248BE is to enable communication between devices operating at different voltage levels, ensuring compatibility and seamless data transfer.

  3. Q: What voltage levels can PI3B16248BE support? A: PI3B16248BE supports voltage translation between two voltage domains, typically ranging from 1.2V to 5.5V.

  4. Q: How does PI3B16248BE achieve bidirectional level shifting? A: PI3B16248BE uses a combination of MOSFETs and control logic to facilitate bidirectional voltage translation between two voltage domains.

  5. Q: Can PI3B16248BE handle high-speed data transmission? A: Yes, PI3B16248BE is designed to support high-speed data transmission, making it suitable for various applications requiring fast communication.

  6. Q: What are some typical applications of PI3B16248BE? A: PI3B16248BE is commonly used in applications such as I2C, SMBus, UART, GPIO, and other interfaces where voltage level translation is required.

  7. Q: Does PI3B16248BE require external components for operation? A: Yes, PI3B16248BE may require external pull-up or pull-down resistors depending on the specific application and voltage levels involved.

  8. Q: Is PI3B16248BE a standalone IC or part of a larger system? A: PI3B16248BE is a standalone IC that can be integrated into larger systems or circuits as a voltage translation solution.

  9. Q: Can PI3B16248BE handle multiple channels simultaneously? A: Yes, PI3B16248BE typically comes with multiple bidirectional channels, allowing for simultaneous voltage translation across different signal lines.

  10. Q: Where can I find more information about using PI3B16248BE in technical solutions? A: You can refer to the datasheet and application notes provided by the manufacturer, as well as online resources and forums dedicated to electronic components and circuit design.