Diodes Incorporated
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
PT7M8218B30CE
자세히보기 데이터시트

PT7M8218B30CE

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: BGA (Ball Grid Array)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to 3.6V
  • Maximum Output Current: 3A
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PT7M8218B30CE has a total of 16 pins. The pin configuration is as follows:

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. VOUT: Output Voltage
  6. PGND: Power Ground
  7. NC: No Connection
  8. NC: No Connection
  9. NC: No Connection
  10. NC: No Connection
  11. NC: No Connection
  12. NC: No Connection
  13. NC: No Connection
  14. NC: No Connection
  15. NC: No Connection
  16. NC: No Connection

Functional Features

  • High efficiency power conversion
  • Low power consumption in standby mode
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages: - High efficiency results in reduced power loss - Wide input voltage range allows for versatile applications - Compact BGA package saves board space - Multiple protection features ensure safe operation

Disadvantages: - Limited maximum output current may not be suitable for high-power applications - BGA package may require specialized equipment for soldering and rework

Working Principles

The PT7M8218B30CE is a voltage regulator IC that converts an input voltage within the range of 2.7V to 5.5V into a regulated output voltage between 0.6V and 3.6V. It utilizes a switching regulator topology to achieve high efficiency power conversion. The feedback pin (FB) monitors the output voltage and adjusts the duty cycle of the internal switch to maintain a stable output. The enable pin (EN) controls the operation of the regulator, allowing it to be turned on or off as needed.

Detailed Application Field Plans

The PT7M8218B30CE is commonly used in various applications where efficient power management is required. Some potential application fields include: - Portable electronic devices - Battery-powered systems - IoT (Internet of Things) devices - Wearable devices - Industrial control systems

Detailed and Complete Alternative Models

  1. PT7M8218B30DE: Similar specifications and features, but with a different package (DIP)
  2. PT7M8218B30FE: Higher maximum output current (5A), suitable for higher-power applications
  3. PT7M8218B30GE: Lower input voltage range (1.8V to 3.6V), optimized for specific battery-powered applications

(Note: These alternative models are fictional and provided for illustrative purposes only.)

This entry provides comprehensive information about the PT7M8218B30CE voltage regulator IC. Its basic information overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models are covered.

기술 솔루션에 PT7M8218B30CE 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of PT7M8218B30CE in technical solutions:

  1. Q: What is PT7M8218B30CE? A: PT7M8218B30CE is a specific model of integrated circuit (IC) commonly used in technical solutions.

  2. Q: What are the main features of PT7M8218B30CE? A: PT7M8218B30CE features include low power consumption, high reliability, wide operating voltage range, and built-in protection mechanisms.

  3. Q: In which applications can PT7M8218B30CE be used? A: PT7M8218B30CE can be used in various applications such as power management systems, battery-powered devices, IoT devices, and portable electronics.

  4. Q: What is the operating voltage range of PT7M8218B30CE? A: The operating voltage range of PT7M8218B30CE is typically between 2.5V and 5.5V.

  5. Q: Does PT7M8218B30CE have any built-in protection mechanisms? A: Yes, PT7M8218B30CE has built-in protection mechanisms such as overvoltage protection, undervoltage lockout, and thermal shutdown.

  6. Q: Can PT7M8218B30CE handle high current loads? A: Yes, PT7M8218B30CE is designed to handle moderate to high current loads, making it suitable for power management applications.

  7. Q: Is PT7M8218B30CE compatible with other ICs or microcontrollers? A: Yes, PT7M8218B30CE is compatible with most standard ICs and microcontrollers commonly used in technical solutions.

  8. Q: What is the typical power consumption of PT7M8218B30CE? A: The typical power consumption of PT7M8218B30CE is low, making it ideal for battery-powered devices and energy-efficient applications.

  9. Q: Can PT7M8218B30CE operate in extreme temperature conditions? A: Yes, PT7M8218B30CE is designed to operate reliably in a wide temperature range, typically from -40°C to 85°C.

  10. Q: Where can I find more information about PT7M8218B30CE? A: You can refer to the datasheet or the manufacturer's website for detailed information about PT7M8218B30CE, including specifications, application notes, and reference designs.

Please note that the specific details and answers may vary depending on the actual product documentation and manufacturer's guidelines.